Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for SENAO WSR-3800
-
Page 1: Quick Installation Guide
Quick Installation Guide Quick Installation Guide Version: 1.0.1... - Page 2 Quick Installation Guide Copyright This document is protected by R.O.C. copyright laws and other laws. You may not copy, reproduce, distribute, publish, display, perform, or modify any part of this content in any form or by any means without prior written permission of vendor. You may not alter or remove any copyright or other notice from copies of the content.
-
Page 3: Package Contents
Quick Installation Guide This Quick Installation Guide (QIG) provides instruction for installation. This guide also shows you how to connect the device with other Network equipments. 1. Package Contents The standard package includes: Main system x 1 CD-ROM (Administrator’s Manual and Quick Installation Guide) x 1 Power adapter x 1 Ethernet cable x 1 Console Cable x 1... -
Page 4: Installation
Quick Installation Guide (Back Side) Public LAN Can be connected to WAN Port the open network can be environment managed connected to by the system, and DC Power the Internet or requires authentication Intranet by Power Cord before logging on to Switch. - Page 5 Quick Installation Guide and then use the network cable of the 10/100BaseT to connect to the Administrator’s PC. If it is necessary to connect the PC or wireless AP directly to the Authentication, then we need to use the cross over line. Connect the Private LAN port.
-
Page 6: Quick Installation
Quick Installation Guide 4. Quick Installation In the following sections, we will guide you step by step to set up a system composed by individual device. This example only provides brief instructions, Please refer to Administrator’s Manual “Chapter 5 Web Management Interface” for the detailed description of each function. - Page 7 Quick Installation Guide Click System Configuration > Configuration Wizard and the configuration wizard will appear on the screen. Click “Run Wizard” go to next screen. Step 1. Change Administrator’s Password The wizard will guide you through the nine steps for completing setup.
- Page 8 Quick Installation Guide Step 2. Choose System’s Time Zone Choose your time zone. Click “Next” to go to next screen. Step 3. Set System Information The Succeed Page, External Time Server, and DNS Server will appear after the user login system successfully, click “Next”...
- Page 9 Quick Installation Guide • Static IP Address Please enter the IP address, Subnet mask, Default Gateway information of WAN Port; click “Next” to go to the next screen. •Dynamic IP Address Click “Next” to go to the next screen. •PPPoE Connection Click “Next”...
- Page 10 Quick Installation Guide Please enter the PPPoE Username and Password. After the setup is completed, click “Next”. Step 5. Set Related Information for Public LAN Configure the parameters of the Authentication interface including the IP address, subnet mask, and disable/enable DHCP Server, the default setting is to enable the DHCP Server.
- Page 11 Quick Installation Guide Step 6. Set Wireless-Access Point Connection Entry your SSID, select Channel and AP mode. Step 7. Configuration Wireless Port Configure the parameters of the Wireless Port interface including the IP address, subnet mask, and disable/enable DHCP. Click “Next”...
- Page 12 Quick Installation Guide 5. Accessing External Network from Authentication (Public LAN) If all the steps are set properly so far, we can further connect the device to the managed network to experience the controlled network access environment. Firstly, connect a user-end device to the network at the device Authentication, and set the dynamic access network.
- Page 13 Quick Installation Guide Attention: Nevertheless, if you are not on-demand user, please do not click on “Remaining”, because the following error window will appear.
- Page 14 Quick Installation Guide For On-demand user: The following is the successfully login page for on-demand user. There is an extra function, the “Redeem” button, that user can add credit in the current account if the remaining usage is considered to be insufficient. After user has paid the redeem cost at counter, he/she will get another username and...