Read these instructions before using Who should I contact if I have questions or concerns? Epilaser has 4 safety features to ensure safe use EPILADY EPILASER INTENDED USE (INDICATIONS) WHO SHOULD NOT USE THE EPILASER (CONTRAINDICATIONS) WARNINGS BENEFITS & RISKS...
Page 3
Date Treatment Area Number of Pulses EPILASER TREATMENT OVERVIEW Before your First Treatment Between Treatments During your First 3 Months After 3 Months SPOT TEST INSTRUCTIONS CHARGING THE SCREEN & LASER Charging the Screen Charging the Laser EPILASER TREATMENT INSTRUCTIONS CARING FOR YOUR EPILASER Cleaning the Laser Cleaning the Screen...
Match your skin tone of the area(s) you wish to treat to the skin tones shown below to determine if you can safely Date Treatment Area Number of Pulses use this laser. The Epilady Epilaser is intended for use only on Type I (white) to Type IV (light brown) skin tones. Type I Type II Type III...
TECHNICAL SPECIFICATIONS WHERE YOU CAN AND CANNOT USE THIS LASER WHERE TO USE THIS LASER WHERE TO USE THIS LASER Laser Type: Diode laser Epilaser can be used on the following areas Epilaser is not safe for use on the following Laser class: 1M of the body: areas of the body:...
DO NOT return your product to the seller if you need service. The Epilady Epilaser gives you long-lasting hair removal results at home, unlike temporary solutions such as If your Epilaser needs service before the 1-year warranty period expires, contact EpiladyUSA Customer Support.
For best results, treat every 2 weeks for up to 3 months or until you are satis ed with the amount of hair reduction. repair or if your Epilaser is replaced by Epilady during the warranty period. This guarantee is only valid for products purchased from authorized retailers or directly from Epilady. Read these instructions before using This guarantee is only valid for products purchased in the United States of America and its territories.
Epilaser Safety Features Your Problem It’s Possible that... What you should do Safety Key - The safety key must be physically inserted into the laser to function. My Epilaser was working The battery needs to be charged. Charge your Epilaser (see page 18). properly, but then it stopped Laser Button - To prevent accidental use the laser button must be pressed for 2 seconds to turn on the laser.
Page 9
EPILASER’S 4 SAFETY FEATURES Your Problem It’s Possible that... What you should do Everything is connected The safety key is not inserted. Insert the safety key into the laser correctly, but the laser will (see page 19). not emit a pulse. The laser has not been turned on.
Your Problem It’s Possible that... What you should do The Epilady Epilaser is used to remove unwanted hair. It is an over-the-counter device intended for adjunctive When I put my Epilaser against The laser is not turned on. Press the laser button for 2 seconds (combined) use with shaving for sustained hair removal with periodic treatments.
TROUBLESHOOTING WHO SHOULD NOT USE THE EPILASER (CONTRAINDICATIONS) Not Safe Skin Tones: Please call EpiladyUSA Customer Support at 713-666-4582 for additional help. DO NOT use the Epilaser if your skin tone matches one listed as “Not Safe” on the Skin Tone Safety Chart (see page 1). If you use the Epilaser on medium brown, Type V and Type VI Your Problem It’s Possible that...
WARNINGS Cleaning the Screen DO NOT use the Epilaser on the following areas of your body: 1. Wipe the screen with a soft cloth only. On or around the eyes, eyebrows, or eyelashes. Doing so may cause permanent eye injury. Recharge Every 3 Months for Long-Term Storage Anywhere on or around the forehead, temples, nostrils, ears, nipples, genitals, or around the anus.
Page 13
DO NOT get the Epilaser, the cable(s), the screen, or the power adaptor damp or wet. If wet, do not use the Epilaser or the power adaptor. Call Epilady USA Customer Support. Performing a DO NOT use the Epilaser while bathing or place it near a tub or a sink.
BENEFITS & RISKS Turn O Epilaser and Screen when Done with Treatment Bene ts 10a: Hold down the laser button for 2 seconds to turn o the laser. The indicator light at the bottom of When used as directed, the Epilaser is an over-the-counter device for personal use that provides permanent the laser will turn red to let you know the laser is hair reduction.
Page 15
Reposition and Repeat for Next Hair In rare cases, some users may experience skin-swelling, especially around the hair follicle. If the swelling After treating one hair, shift and reposition the treatment window in the area until you have located another doesn’t go away within 2-3 days, stop using the Epilaser and see your doctor.
GETTING TO KNOW YOUR EPILASER Target and Treat Hair The Epilaser kit consists of 2 major components; the screen and the laser. 8a: Press the treatment window fully against your skin on the area you want to treat. If the skin tone sensor detects that the skin is “Not Safe” the laser will not give the Screen treatment.
Turn On Screen Laser (E) Treatment Window: The end of the laser that 6a: Press and hold the power button on must make contact with the skin and the area you the top of the screen for 3 seconds. wish to laser. When the laser is on you will see a 6b: The screen will turn on and the white light shine from this end.
EPILASER TREATMENT OVERVIEW Connect Laser to Screen Before your First Treatment 3a: If the screen is still connected to the power adaptor, disconnect it at this time. 6 weeks before your treatment, do not get a skin peel or other skin resurfacing procedure. DO NOT use the Epilaser while the screen is plugged into an electrical outlet.
EPILASER TREATMENT INSTRUCTIONS SPOT TEST INSTRUCTIONS Before your rst full treatment, we recommend doing 3 spot tests with the Epilaser on the area(s) you plan to NOTE: Before every treatment check the charge of your Epilaser and screen. If the battery level is low, follow instructions on pages 17-18 to charge the laser and screen.
CHARGING THE SCREEN & LASER Charging the Laser IMPORTANT: The screen should never be connected to an electrical outlet while charging the laser. Before your rst treatment and between treatments, charge the screen and laser. Unplug the power cable from the screen (and electrical outlet) before charging the laser. Charging the Screen 1.
Need help?
Do you have a question about the EP-720-01 and is the answer not in the manual?
Questions and answers