Table of Contents
Advertisement
ENGLISH
Summary
1 - GENERAL SAFETY WARNINGS AND PRECAUTIONS . . . . . . . . . . . . 1
3 - INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
3.1 - Preliminary checks on installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
3.3 - Limits of use for the product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3.4 - Set-up for installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3.5 - Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3.6 - Manual release and block of the gear motor . . . . . . . . . . . . . . . . . . . . . 2
4 - ELECTRIC CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
5 - INSPECTION AND COMMISSIONING . . . . . . . . . . . . . . . . . . . . . . . . . 2
5.1 - Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
5.2 - Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
6 - PRODUCT MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
DISPOSAL OF THE PRODUCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PRODUCT TECHNICAL FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
CE DECLARATION OF CONFORMITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
INSTRUCTIONS AND WARNINGS FOR THE USER
(cut-out attachment) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II
IMAGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VIII - XIII
GENERAL SAFETY WARNINGS
1
AND PRECAUTIONS
Recommendations regarding safety
• ATTENTION! - This manual contains important instructions and recom-
mendations regarding the safety of persons. Incorrect installation can
cause serious injury. Read the manual completely before starting work. If in
doubt, suspend the installation and request clarifications from the Nice After-
sales Assistance.
• ATTENTION! - Important instructions: keep this manual for any future
maintenance interventions and product disposal.
• ATTENTION! - In compliance with the most recent European Legisla-
tion, the realisation of an automatic door or gate must respect the Stan-
dards envisioned by the 2006/42/CE Directive (ex 98/37/CE) (Machinery
Directive) and in particular, the EN 12445; EN 12453; EN 12635 and EN
13241-1 Standards, which allow to declare conformity of the automa-
tion. Considering this, all product installation, connection, inspection
and maintenance operations must only be performed by a qualified and
skilled technician!
Recommendations for installation
• Before starting installation, check whether this product is suitable to auto-
mate your gate or door (see chapter 3 and the "Product technical features").
If it is not suitable, DO NOT proceed with installation.
• All installation and maintenance operations must take place with the
automation disconnected from the electric power input. If the power
input disconnection device is not visible from the place where the automation
is positioned, before starting work, affix a sign onto the disconnection device
that states "ATTENTION! MAINTENANCE IN PROGRESS".
• Handle the automation with care during installation, preventing crushing, blows,
falls or contact with liquids of any nature. Do not place the product near to heat
sources or expose it to naked flames. All of these actions can damage it and be
cause of malfunctioning or dangerous situations. If this occurs, suspend installa-
tion immediately and contact the Nice After-sales Assistance.
• Do not modify any product parts. Unauthorised operations can only cause
malfunctioning. The manufacturer declines liability for damage deriving from
arbitrary modifications to the product.
• If the gate or door to be automated has a pedestrian door the plant must be
set up with a control system that prevents functioning of the motor when the
pedestrian door is open.
• The product packaging material must be disposed of in compliance with
local legislation.
DESCRIPTION OF THE PRODUCT
2
AND DESTINATION OF USE
This product is destined to be used to automate gates or doors with hinged
panels, exclusively in the residential environment.
ATTENTION! - Any use different to that described and in environmental
conditions different to those stated in this manual must be considered
improper and prohibited!
The product is an electro-mechanical gear motor, with a 24 Vdc motor. The gear
motor is powered by the external control unit, to which it must be connected.
If the electric energy is interrupted (black-out), the gate panels can be moved
by releasing the gear motor using the relevant wrench; to perform the manual
manoeuvre, see chapter 3.6.
The product is available in two versions:
- XME2024 without encoder, suitable for MC424 control units.
- XME2124 with encoder, suitable for MC824H control units.
Do not use gear motors with incompatible control units.
3
INSTALLATION
3.1 - Preliminary checks on installation
Before performing installation, check the integrity of the product components,
the adequacy of the model chosen and the suitability of the environment des-
tined for installation.
IMPORTANT - The gear motor cannot automate a manual gate that
does not have an efficient and safe mechanical structure. Moreover, it
cannot solve defects caused by incorrect installation or bad mainte-
nance of the gate itself.
English - 1
Advertisement
Table of Contents
