BigTimeClocks 190 User Manual

BIGTIMECLOCKS
MODEL #190
DAYS COUNTDOWN/COUNT UP
STOPWATCH/TIMER
2018 USER'S MANUAL
This clock/timer is used to count down to or count up to a particular day so, for example, if you
have two years to complete a project you might use it to monitor your progress or you might
want to count down to Christmas or New Years day etc. Similarly you can set the timer to
count up to a particular day. The Countdown and Count up operates up to 1000 days
maximum.
The timer is also a stopwatch which counts in hours/minutes/seconds/hundredths. The
maximum time on the stopwatch is 1000 hours
The clock has 3 alert modes to chose from at the end of a Countdown or Count up as
described below.
1. GENERAL
There is a clock for regular six digit time in 12 or 24 hour format.
The days countdown clock has countdown, count up, , stopwatch functions.
If power is off the clock/timers and settings will still operate
Remote uses 2 AAA batteries.
When you first plug the clock in the display should begin. If not press the power key on.
2. CLOCK
Press CLOCK to enter clock mode. Press SET to change time and the digits will flash sequentially
until the hours, minutes ,seconds have been changed. Press SET again to start the clock. Press
12/24 to change time format from 12 to 24 hours. The clock can be viewed at any time by
pressing Clock without stopping any of the countdown/count up/stopwatch functions.
®
1-702 726-9030
info@bigtimeclocks.biz
www.bigtimeclocks.biz
Page ! of ! 1 3