Jubilee Gent
Instructions for winding, quick date and time setting
1 Manual winding
2 Quick date change
3 Time setting
Position 1
MANUAL WINDING
If the watch has not been worn for approx 44 hours, then it will stop
(power reserve has run down). You can then wind it manually. Turn
the crown in its normal position 1. Then turn the crown clockwise
about 20 times in order to wind it to get it star ted again. Your watch
will wind itself again when you wear it on your wrist.
Position 2
QUICK DATE CHANGE
To change the date quickly, pull the crown out to position 2. Then
turn the crown clockwise, until the desired date appears in the win-
dow. Automatic date change occurs daily when the hour hand passes
midnight. Your watch continues to operate during this process and
therefore the time does not have to be reset.
Never change the date when the watch indicates a time between
20.00 and 01.00. The automatic date change mechanism operates
during this period and any manual procedure could damage the
movement.
IMPORTANT! After changing the date, press the crown gently to position 1.
JUBILEE GENT Instructions for winding, quick date and time setting Version 1.2 08/2014
1
Position 3
TIME SETTING
To set the time, pull the crown out to position 3 and turn it clock or
counter clockwise until the exact time has been reached.
Never turn the hands counterclockwise or backward between 20.00
and 01.00. The automatic date change mechanism operates during
this period and any manual procedure could damage the movement.
IMPORTANT! After setting the time, press the crown gently to position 1.
2
3
Automatic
1/1
Need help?
Do you have a question about the Jubilee and is the answer not in the manual?
Questions and answers