Advertisement
Installation
Please go to www.elotouch.com/support to verify you have the latest drivers before installing this device.
1
2
3
4
Select location to mount the bar
code scanner. Elo recommends the
lower location in either portrait or
landscape orientation.
Windows Systems:
Visit the N3680 product page on the Honeywell Scanning and Mobility website to download and install
EZConfig for Scanning (Version 4.5.20) and Honeywell Scanning and Mobility USB Serial Driver
Android systems:
The Elo Barcode Scanner is ready to use in its default mode. The scanner default mode is:
1. USB virtual com port interface
2. Presentation mode (always on)
3. Beep on scan
Remove the selected peripheral
4. Set up to read most common codes.
cover from the touchmonitor
Please note: USB Keyboard Mode will automatically add a CR (carriage return) suffix.
To return the scanner to the default configuration mode (USB Virtual COM Port), scan the barcode below:
Gently insert the bar code scanner
into the peripheral bay taking care
to ensure the connector mates
properly.
For additional settings and configurations, please visit the product page on www.elotouch.com
Install the 2 flat head screws included
with the kit and cover the screws with
the adhesive mylar covers if desired.
USB Keyboard Mode
USB HID Mode
Advertisement
