Advertisement
Table of Contents
Rowkin Surge - Quick Start Guide
•
Start on your wireless journey with the Rowkin Surge
Pairing To Your Mobile Device:
1.) Locate the primary (right) earbud.
2.) Press and hold the control button (o) on the primary earbud for 6-8 seconds until the LED indicator on the bottom
flashes alternating red and white lights.
3.) Go to the Bluetooth settings on your device. "Rowkin-Surge" should display. Select "Rowkin-Surge" to pair the earbud.
The primary earbud should now be paired to your device.
4.) Once the primary earbud is paired to your device, turn on the secondary (left) earbud by pressing and holding the
control button on the secondary earbud until you see the white light LED light flash. Once you see the white LED
light flash, release the control button. You will now see the white LED light blink on both earbuds or hear the "Power
On" message. The two earbuds will pair automatically.
5.) The LED indicator light on both earbuds should now flash white, indicating they are paired to your device and ready
for action.
Volume +
Control button
Volume -
LED
Mic
Micro-USB
Advertisement
Table of Contents
Related Manuals for Rowkin Surge
Summary of Contents for Rowkin Surge
- Page 1 2.) Press and hold the control button (o) on the primary earbud for 6-8 seconds until the LED indicator on the bottom flashes alternating red and white lights. 3.) Go to the Bluetooth settings on your device. “Rowkin-Surge” should display. Select “Rowkin-Surge” to pair the earbud. The primary earbud should now be paired to your device.
- Page 2 Turning your Rowkin On / O Power on: Press and hold control button until the LED indicator blinks white. Power off: Press and hold control button on either earbud until the LED indicator light turns red. Release the control button. Both left and right earbuds should both power off at the same time and the LED indicators should turn off.
Need help?
Do you have a question about the Surge and is the answer not in the manual?
Questions and answers