yAyusi MCB428B User Manual

SAFETY INFORMATION
* Please read and keep this Manual, and pay attention to the below warnings.
* Please put this speaker in a stable place, to avoid any damage caused by accident dropping.
* Please keep this speaker away from any liquid or fire.
* Please don't leave this speaker in high temperature, or high moist environment for long time.
Bluetooth speakers with clock radio
* Please don't insolate this speaker
* The charging voltage is 5V. The speaker's internal chip will be burned out and couldn't work
normally if using higher charger
PACKING LIST
Pls make sure the purchased item is with the correct Model No. If the item model number doesn't
match with that of the package, pls try to contact the agents .
MCB428B bluetooth speaker with clock radio
1 pcs speaker
1 pcs AUX cable and 1 pcs charging cable 1 pcs manual
MCB428B
User Manual
MCB428B bluetooth speaker
MCB428B bluetooth speaker User Manual
Please read me before using Please read me before using
OVERVIEW AND INSTRUCTION FOR USE
11 1 2
3 4
Note: It will be in Time Mode after power ON. And will get into sleep state automatically if with 5 6
12
no operation in 10 minutes. (will back to Time mode by pressing any button)
13
This speaker is with Bluetooth Speaker Mode and Alarm Setting Mode.
Bluetooth Speaker Mode: long press button to turn on, the speaker is in the Bluetooth
Speaker Mode at this status, Alarm can' t be set. 14 15 16 17 18 19 20 21 22
7
Alarm Setting Mode: long press button to turn off the speaker, at this status thealarm and 8
9
the time can be set, while Bluetooth speaker is not functional. 10
BUTTONS AND SCREEN INSTRUCTION
Time/Alarm Setting Instruction:
" "Previous Song/Long Press for Back Ground
1. Press for 3 seconds to turn the power ON(will in time mode), press again, the 11 " "Time
Light On and Off Long press "" key for display
number will start flashing, press / to set hours/minutes/Time Format; Alarm 1
degrees Fahrenheit
" "Temperature
hours/minutes, Alarm 1 Loop, Alarm 1 rings; Alarm 2 hours/minutes, Alarm 2 Loop, Alarm 2 12
"Next Song/Long Press for Light
"
rings. Press / to adjust the content; Press to confirm after setting finished. " "Battery
Brightness Adjusting /Power off the display 13
2. Alarm On/Off Setting: OFF is Alarm Off, ON is Alarm On, there will be a alarm icon on the (3 brightness
"12 Hours
14 " 24
HOURS
screen. " "key for setting time and alarm clock function
15 " "Alarm 1
3. Alarm Loop Setting: ONE indicates it will ring only once. Loop indicates it will ring in loop. (Ten " "Mode Switch/Long Press Search 1
Radio when it's under FM mode
minutes for one loop, it will loop five times) "Alarm 2
16 "
On Bluetooth mode, and entry into 2
4. Press any button to stop the alarm ring
pairing after long press "M" key within
17 " "Bluetooth
5. Long press the buttons / at same time to close the alarm.
3 seconds
Snooze function: when the alarm bell rings, press the key to turn off the alarm clock. When "Volume Up/Time Forward " "AUX
" 18
the alarm bell rings, and press the button to enter the snooze function for 9 minutes and repeat
" "Volume Down/Time Backward " "TF card
19
5 times. The alarm time of the unit is 30 minutes.
" TF "TF card slot
6. Alarm rings: It has 5 rings, and TF/FM as a choice. If you choose TF as the alarm clock bell 20 " "FM Radio
(the machine must have TF card insert, the card must have music files can play normally, when "AUX"Aux line in Remarks:This unit enters Bluetooth
" "AM
21
mode by default after power on, and short press
the alarm clock time to the machine will automatically read the TF card play, playing order with
⑨ " DC "Charging slot
22 " "PM
the normal read card play order, If you set the TF card for the alarm bell and then not insert the
⑩ LED Led
TF card, the alarm clock time to the machine will default ringtone 1 alarm clock ringtone
Bluetooth Speaker Instruction: It supports following format file: MP3 WAV.
How to connect the mobile phone by Bluetooth? It support maximum 32GB TF card
1. Long press for 3 seconds to turn the power ON, there will be a turn on prompt sound.
"Power on" . Entry into Bluetooth mode after turn on, then long press "M" key 3 seconds for FM Radio
pairing. Long press button M in the radio mode, it will search the radio automatically. Once finished it,
2. Turn on the Bluetooth of mobile phone and search MCB428, and then match the speaker to press button to play the radio.
mobile phone. There will be a prompt sound after connection succeeded, and the blue indicator
light will stop flashing. Bluetooth paring time is about 1 minute. It will be different for different
How to charge?
mobile phones as the Bluetooth version is different. 1.The Speaker will make a prompt sound and turn off automatically when the battery is low.
3. Note: There is a memory function for the Bluetooth speaker. Turn off the Bluetooth of the Insert one end of the cable to the charging slot of speaker, the USB plug to the computer or the
previous mobile phone before connecting to another one. mobile charger (5V 1A). The front indicator light on red indicates it' s charging, the front
4. Buttons control Instruction: press button for last song, press button for next song; indicator light off indicates it' s fully charged. (The charging voltage is 5V. The speaker's
press button for volume down, press button for volume up; Press button for
internal chip will be burned out and couldn' t work normally if using higher charger)
pause / play. 2.It takes around 4 hours for fully charged. It could work about 8 hours at maximum volume,
5. Short press button to answer the phone call, long press button to refuse the and 16 hours at default volume. The standby time is about 180 hours.
phone call. Press button to finish the phone call, the speaker will be back to work
6. Long press for 3 seconds to turn off the speaker. (The speaker will turn off automatically Reset Function:
if it doesn' t work and have got no operate instruction within 10 minutes.) When the buttons are out of control, the speaker may get into stuck. Please check if the battery
ran out. If battery ran out, please charge it. If the stuck happen while the battery is full, please
How to Line in by AUX (external audio input)? insert a pointy tool into the reset hole and long press for 3 seconds. Then turn on the speaker.
This speaker can connect to all kinds of audio devices (such as mobile phones, pad, MP3
player, cassette player, CD player, radio, etc.). With 3.5mm AUX plug in the earphone jack of Using for Tablet PC/Notebook:
the audio device and the other end in the AUX slot of the speaker, there will be a prompt sound. Connect the speaker and Tablet PC/Notebook by using the 3.5mm AUX cable.
Then it can play under AUX line in mode.
F&Q
How to use Micro SD/TF Card? 1. It cannot be matched with the devices by Bluetooth: (1) turn off the speaker and mobile
Insert the Micro SD/TF Card into the TF slot of speaker, there will be a prompt sound when phone, and then turn on both, rematch. (2) Too many Bluetooth devices surround, turn off the
press M turn to TF mode, and then play the audio files in the card. other Bluetooth devices
2. Sound too small or distortion too much: (1) may be battery runs out. Please charge it. (2)
Turn up the volume of the mobile phone. Long press " " for 3 secends to turn on, the speaker will turn into Time
3. Sound off and on: please check if the range between the speaker and the device is more than Mode.
10 meters. Or check if there are any barrier between the speaker and the device
Specification
Model number: MCB428B Power output: 5W*2
Bluetooth version: 4.2+EDR Bluetooth range: ≤10 meter
Battery: 3.7V 3600mAh Power input: