Features and Specifications Speed Control Dial Control Handle Levers Quick-Adjust Lifting Bail Eyebolts Multi-Position Handle Kickstand Slide Weights Debris-Deflecting Front Weight Traction Wheels FEATURES Speed Control Dial - Limits maximum forward speed. Control Handle Levers - Controls both speed and direction of scraper with simple twist grips.
Page 5
Features and Specifications Machine Variants Region Serial Number Input Power Body Panels 6280-COM-10XXXX 120V / 60 Hz Silver Vein Domestic 6280-COM-12XXXX 120V / 60 Hz Green 6280-COM-23XXXX 120V / 60 Hz Silver Vein 6280-COM-11XXXX 230V / 50 Hz Silver Vein 6280-COM-13XXXX 230V / 50 Hz Silver Vein...
Safety GENERAL RULES FOR SAFE OPERATION Before use, anyone operating or performing maintenance on this equipment must read and understand this manual, as well as any labels pack- aged with or attached to the machine and its components. Read the manual carefully to learn equipment applications and limitations, as well as potential hazards associated with this type of equipment.
Safety WALK-BEHIND SCRAPER SAFETY GUIDELINES Before use, anyone operating this equipment must read and understand these safety instructions. Scraping Beware of hidden obtrusions. Watch out for hidden dangers and protrusions in flooring. Do not use on largely uneven surfaces. Observe location of electrical supplies and extension cords. Do not allow cutting heads to come into contact with any electrical supply or extension cord.
Safety HYDRAULIC SAFETY Maintaining a Safe Work Environment Establishing a safe work environment in and around your hydraulic equipment is extremely important. The easiest and most effective way to avoid problems is to make sure associates understand their equipment, know how to operate the machines safely, and recognize the dangers if handled carelessly.
Components and Assembly TRANSPORTATION Attach/Remove Transport Wheels WARNING: NEVER HAVE TRANSPORT WHEEL ASSEMBLY MOUNTED ON MACHINE OR WEHEELS DISENGAGED WHEN GOING UP OR DOWN A LOADING RAMP OR INCLINE. FAILURE TO DO SO COULD CAUSE LOSS OF CONTROL, DAMAGE TO MACHINE OR PROPERTY, OR SERIOUS INJURY. Transport wheels help eliminate damage to the flooring and make moving the machine easier.
Components and Assembly Re-engaging Wheels Line up wheel hub hole and axle hole (Figure 3). Insert pin and push ring over the hole so that it is parallel to the wheel. Repeat on second wheel. APPLICATION SETUP VCT Tile FIG. 3 Never use a blade wider than the size of the tile being removed.
Operation OPERATING CONTROLS Speed Controls • Speed control knob can be adjusted while machine is running. • Turning speed control knob counterclockwise will increase maximum forward speed (Figure 4). • Turning speed control knob clockwise will decrease maximum forward speed (Fig- ure 4).
Page 12
Operation • Sheet vinyl, solid vinyl, rubber tile, urethane, or PVC sheet roofing will need to be scored for best removal results (Figure 6). Score flooring to the width of the blade. • Self-scoring blades are available in a number of sizes; these blades eliminate the need for pre-scoring material.
Troubleshooting Guide Problem Cause Solution Machine will not start. Insufficient power. Ensure use of properly rated extension cord. Loose capacitor leads. Check capacitor leads to ensure good connection. Overload button on motor has been tripped. Button is located on the bottom of the electric box on motor.
Warranty National Flooring Equipment Inc. (referred to as “the Company”) warrants that each new unit manufactured by The Company, to be free from defects in material and workmanship in normal use and service for a period of twelve (12) months from date of shipment from the Company. For administrative ease, will honor warranty for a period of fifteen (15) months from date of shipment from the company.