Table of Contents
Advertisement
Pairing the microphones
The microphones won't work unless they're paired to the receiver.
To verify that if the teacher microphone is paired to the receiver, press the microphone's
PWR/MUTE button for 1 second. If the BATT LED flashes green, the microphone is paired. If the
BATT LED flashes in another color, turn off the microphone and use the following instructions to
pair the microphone to the receiver.
To verify that if the student microphone is paired to the receiver, press the microphone's PWR /
LINK button for 1 second. If the BATT LED flashes green, the microphone is paired. If the BATT LED
flashes in another color, turn off the microphone and use the following instructions to pair the
microphone to the receiver.
Pairing the teacher microphone
To pair the teacher microphone
1. If the teacher microphone is turned on, turn it off by pressing and holding the
PWR/MUTE button for three seconds.
2. On the receiver, press the LINK button. The LINK LED flashes yellow.
3. On the teacher microphone, press and hold the PWR/MUTE and REC buttons.
A beep is heard through the speakers.
The BATT LED on the microphone and the LINK LED on the receiver light green to indicate
successful pairing.
Pairing the student microphone to the receiver
To pair the student microphone
1. If the student microphone is turned on, turn it off by sliding the TALK switch down.
The BATT LED is unlit.
2. On the receiver, press the LINK button. The LINK LED flashes yellow.
smarttech.com/kb/171200
Advertisement
Table of Contents
