AEI Plug'n'Go RADC02X2 Installation Instructions

Part No. RADC02X2
Plug'n'go™
Wireless Door Chime

Installation Instructions

ALLWAYS TEST YOUR DOOR CHIME PRIOR TO MOUNTING
Step 1
Plug the chime unit into a convenient
mains socket and switch the socket on.
The orange light on the front of the
chime unit should now glow.
NOW YOU HAVE TESTED THE OPERATION, YOU'RE READY TO INSTALL
Step 4 (uPVC or
Wood Frame)
Mount using the supplied double
sided sticky pad.
Always test the door chime in the
location you intend to install in.
Step 2
Remove completely the battery saver
tab from the rear face of the bellpush
unit.
Step 4 (Wood Frame)
Mount using the supplied pair of
screws. (Not suitable for uPVC)
Always test the door chime in the
location you intend to install in.
170505A
Step 3
Test the chime by pressing the button
on the front of the bellpush unit.
Always test the chime and bellpush
units in their desired location prior to
mounting.
Attach the front of the bellpush unit and
We do not recomend screwing the
backplate to a uPVC frame.