RADEMACHER 9481 Operating And Installation Manual page 2

9. Connect the DuoFern Radio Module to the
smoke alarm
Colour coding of the connector
Figure 2.1
(-) black
(+) brown
(9 V) red
10. Logging on and off the HomePilot® or a
DuoFern actuator
The log-on and log-off is effected by pressing the corre-
sponding button, see Figure 1.
= connect button (log-on)
= disconnect button (log-off)
NOTE
◆ The log-on and log-off mode respectively remains
active for approx. 120 seconds.
◆ Battery-operated DuoFern devices cannot be logged-
on to the DuoFern Radio Module.
10.1 Login
1. Briefly press the connect
button on the DuoFern
Radio Module.
1.1. As soon as the connect mode is active, the indica-
tor light of the DuoFern Radio Module will flash
green.
2. Log the DuoFern Radio Module onto the
HomePilot® or onto the DuoFern actuator.
To do so, please refer to the respective
operating manual.
3. If the login is successful, the indicator light will
light up green continuously for 5 seconds.
10.2 Log off
1. Briefly press the disconnect
button on the DuoFern Radio
Module.
1.1. As soon as the disconnect mode is active, the indi-
cator light of the DuoFern Radio Module will flash
red.
2. Log the DuoFern Radio Module off the HomePilot®
or off the DuoFern actuator.
To do so, please refer to the respective
operating manual.
3. If log off is successful, the indicator light will light
up red continuously for 5 seconds.
10.3 Clear
This function logs off all of the logged-on DuoFern devices
that are no longer reacting. This could be necessary with a
faulty device, for instance, that can no longer be logged-off
in a regular manner.
1. Press the "connect" button
for approx. 4 seconds until
the indicator light flashes
red.
2. The DuoFern Radio Module transmits a control
signal to all logged-on DuoFern devices.
Unavailable DuoFern devices are automatically logged-
off.
3. Clearing is complete as soon as the indicator light
lights up green for 5 seconds.
10.4 Deleting all settings (Reset)
1. Press and hold the
disconnect button for
approx. 4 seconds.
2. All settings and logged-on DuoFern devices will
be deleted.
The DuoFern Radio Module will then be returned to the
original supplied condition.
11. Putting the smoke alarm and the DuoFern
Radio Module together
Clamped connecting cables may lead to
short-circuit and destroy the device.
◆ The connecting cable of the DuoFern
Radio Module must not be pinched/
clamped during the installation.
◆ Ensure that the connecting cable sits in
the housing.
NOTE
The smoke alarm has an installation lock in the battery
compartment, which prevents it from being put together
without the battery. The DuoFern Radio Module and the
smoke alarm can only be put together with the battery in-
serted and connected, see Chapter 8.2 (item 2.).
1. Place the smoke alarm on the base and turn it
in a clock-wise direction until it locks in place.
Figure 3
Figure 3.1
Both markings on the
base and on the smoke
alarm must be above one
another.
12. Carry out a function test
The DuoFern Radio Module and the smoke alarm must be
regularly checked and tested for correct functioning.
For this, please read the operating instructions
of the ESYLUX PROTECTOR K 9 V Smoke Alarm.
1. Press the test button on the smoke alarm:
◆ A very loud alarm signal will sound from the smoke
alarm.
◆ The DuoFern Radio Module transmits a warning
signal to all logged-on DuoFern devices.
2. Release the test button:
◆ The alarm signal will switch off again.
◆ The DuoFern Radio Module transmits an all-clear
to all logged-on DuoFern devices.
13. Changing the battery
If the battery is discharged, the HomePilot® and the ESYLUX
PROTECTOR K 9 V Smoke Alarm will indicate that a battery
exchange is due. All settings remain unaltered when the
battery is changed.
Recommended battery type, see chapter 15.
An optimum battery life is only achieved by using a 9 V
lithium monobloc battery. Alkaline monobloc batteries do
not suffice.
1. Replace the battery with a new one of the
same type.
NOTE
◆ When inserting the battery, pay attention to the
correct polarity.
◆ Empty batteries are special waste and must not
be disposed of with household waste.
14. Simplified EU Declaration of Conformity
RADEMACHER Geräte-Elektronik GmbH hereby
declares that the DuoFern Radio Module
complies with the Directive 2014/53/EU
(Radio Equipment Directive).
The full text of the declaration of conformity is
available at the following website:
www.rademacher.de/ce
15. Technical Specifications
Battery type: 9 V lithium monobloc
battery
Battery life: approx. 8 years (recom-
mended interval to change
battery)
Transmission power: 10 mW
15. Technical Specifications
Range indoors: approx. 30 m
Transmission frequency: 434.5 MHz
Max. number of
DuoFern devices: 10
Permissible ambient
temperature range: - 5 °C to + 40°C
Dimensions:
- Diameter 106 mm
- Height without smoke alarm 24 mm
- Height with smoke alarm 65 mm
16. Warranty conditions
RADEMACHER Geräte-Elektronik GmbH provides a 24-month war-
ranty for new systems that have been installed in compliance with
the installation instructions. All construction faults, material defects
and manufacturing defects are covered by the warranty.
Your statutory warranty claims shall remain unaffected by this war-
ranty.
The following are not covered by the warranty:
◆ Incorrect fitting or installation
◆ Non-observance of the installation and operating instructions
◆ Improper operation or wear and tear
◆ External influences, such as impacts, knocks or weathering
◆ Repairs and modifications by third parties, unauthorised
persons
◆ Use of unsuitable accessories
◆ Damage caused by unacceptable excess voltages (e.g. lightning)
◆ Operational malfunctions caused by radio frequency overlap-
ping and other such radio interference
For the warranty to be applicable, the new device must have been
purchased through one of our approved specialist retailers. Proof of
this can be provided by presenting a copy of the bill.
RADEMACHER shall remedy any defects, which occur within the war-
ranty period free of charge either by repair or by replacement of the
affected parts or by supply of a new replacement unit or one to the
same value. There is no general extension of the original warranty
period by delivery of a replacement or by repair as per the terms of
.
the warranty
The warranty shall not comprise further claims, in particular, the
warrantor shall not be liable for damages resulting from faultiness
of the device. Should the warranty claim not be justified (e.g. upon
expiry of the warranty period or in the event of defects beyond the
warranty claim), the warrantor may try to repair the device for you at
a reasonable/low price.
RADEMACHER
Geräte-Elektronik GmbH
Buschkamp 7
46414 Rhede (Germany)
info@rademacher.de
www.rademacher.de
Service:
Hotline 01807 933-171*
Fax +49 2872 933-253
service@rademacher.de
* 30 seconds free of charge, subsequently 14 cents / minute
from German fixed line networks and max. 42 cents /
minute from German cellular networks.