Table of Contents
Advertisement
Quick Links
W ARNING
PLEASE READ CAREFULLY – EU and EEA (Norway, Iceland and Liechtenstein) only
This symbol indicates that this product is not to be disposed of with your household
waste, according to the WEEE Directive ( 2202/96/EC) and your national law.
This product should be handed over to a designated collection point, e.g., on an
authorized one-for-one basis when you buy a new similar product or to an authorized
collection site for recycling waste electrical and electronic equipment (WEEE) .
Improper handling of this type of waste could have a possible negative impact on the
environment and human health due to potentially hazardous substances that are
Generally associated with EEE. At the same time , your cooperation in the correct
disposal of this product will contribute to the effective usage of natural resources.
For more information about where you can drop off your waste equipment for recycling ,
please contact your local city office , waste authority , approved WEEE scheme or your
household waste disposal service.
Contents and images shown on this manual can be changed without any notice. Please
visit our website www.soundsationmusic.com to check latest version.
DESIGNED IN ITAL Y BY SOUNDSATION®
All the Trademarks are property of their respective owners
SOUNDSATION® is a registered trademark of
FRENEXPORT SPA – Via Enzo Ferrari, 10 - 62017 Porto Recanati – Italy
© SOUNDSATION 2012 – All rights reserved – All total or partial reproduction of this manual
by any other company or person without express authorization of SOUNDSATION is strictly
forbidden.
Lightblaster 3000 DMX
USER MANUAL
PRO-LIGHTIN
G
Advertisement
Table of Contents
Related Manuals for Sound Sation Lightblaster 3000 DMX
Summary of Contents for Sound Sation Lightblaster 3000 DMX
- Page 1 (WEEE) . Lightblaster 3000 DMX Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE.
- Page 2 WARRANTY & SERVICE All SOUNDSATION products feature a limited two-year warranty. This two-year warranty is specific to the date of purchase as shown on your purchase receipt. The following cases/components are not covered from the above warranty: Any accessories supplied with the product Improper use Dear customer, Fault due to wear and tear Any modification of the product effected by the user or a third party first of all, thanks for purchasing a SOUNDSATION® product. Our mission is to satisfy all the possible needs of musical instrument and professional audio SOUNDSATION shall satisfy the warranty obligations by remedying any users offering a wide range of products using the latest technologies for a reasonable price.
- Page 3 GENERAL Note: Enable channel 4 with Mode DIP switch no. 4 on. 0 - 1 Special effects 0 - 5 2 - 16 No effect To prevent possible damages read the following list of actions: 6 - 42 16 - 33 Ramp up - Do not place the product in wet or dirty environments. 43 - 85 33 - 50 Ramp down - Do not remove the protective coverings. 86 - 128 50 - 67 Ramp up-down -Do not cover any of the products ventilation holes. 129 - 171 67 - 84 Random - Air must circulate freely around the product. 172 - 214 84 - Lightning - Do not set the product on a surface with excessive vibration. 215 - 255 100 Spikes - Do not expose the product to high electro-magnetic interference. - Do not expose the product to heat, cold, wet in improper way in respect to its IP grade - Do not leave the product in direct sunlight. - Do not expose the product to electrostatic forces. - Do not place items with flames, such as candles or lighters, on the product.
- Page 4 Finish: electrostatic powder coating SPECIFICATIONS PHYSICAL INSTALLATION Size (without bracket): 245 x 425 x 240 mm (9.7 x 16.7 x 9.5 in) Minimum distance to combustible materials: . 0.5m (20 in) Weight: 7.5 kg (16.5 lb) Minimum distance to illuminated surfaces: 1m (39 in) Minimum clearance around fan and air vents: 0.1m (4 in) THERMAL Maximum ambient temperature: 40° C (104° F) 1-Channel DMX mode DMX DMX Percent Description CONTROL AND PROGRAMMING Channel Value DMX-512 (1990) control: 1, 3, and 4 channel modes 0 - 5 0 - 1 Blackout Data pinout: 3-pin XLR - pin 1 shield, pin 2 cold (-), pin 3 hot (+) 6 - 249 2 - 98 Flash rate, slow to fast Compatible remote controls: Martin MC-1 and Detonator 250 - 255 98 - 100 Continuous "Blinder" effect Stand-alone control: via N.O. or N.C. SPST switch Stand-alone options: selectable flash rate or blinder effect 3 and 4 Channel DMX modes APPROVED LAMPS DMX DMX Strobe lamp: Generic Xenon (200-250V Power supply) Percent Description Channel...
Need help?
Do you have a question about the Lightblaster 3000 DMX and is the answer not in the manual?
Questions and answers