Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Havis Manuals
  4. Computer Accessories
  5. UT-301
  6. Owner's manual

Havis UT-301 Owner's Manual

Havis universal tablet cradle
Hide thumbs

Advertisement

Quick Links

Download this manual
Owner's Manual
Havis Universal Tablet Cradle
UT-301
www.havis.com
1-800-524-9900

Advertisement

loading
Need help?

Need help?

Do you have a question about the UT-301 and is the answer not in the manual?

Questions and answers

Summary of Contents for Havis UT-301

  • Page 1 Owner’s Manual Havis Universal Tablet Cradle UT-301 www.havis.com 1-800-524-9900...

  • Page 2: Table Of Contents

    • NEVER STOW OR MOUNT THE UT-301 DIRECTLY IN A VEHICLE AIRBAG DEPLOYMENT ZONE. • DO NOT USE TABLET WHILE DRIVING. • THIS UNIVERSAL TRAY (UT-301) HAS BEEN DESIGNED TO SECURELY MOUNT A WIDE ARRAY OF TABLETS WITH AND WITHOUT CASES. AS SUCH, THE ABILITY OF THIS UNIVERSAL TRAY (UT-301) TO RETAIN THE TABLET GIVEN A HIGH IMPULSE FORCE WILL BE DEPENDENT UPON THE END USER’S...

  • Page 3: Specifications

    Specifications Universal Tablet Cradle Dimensions Overall Maximum Dimensions 10.1” ( 26.7 cm) W x 7.8” ( 19.8 cm ) H x 2.4” ( 6.1 cm ) D Weight 0.6 lbs ( 0.27 kg ) Compatible Tablet Dimensions Width Between 7” (17.8 cm) and 9.25” (23.5 cm) Height Dependant on Tablet Width.

  • Page 4: Installation

    Havis at 1-800-524-9900. Align the four holes on the mounting surface with the four Mounting Holes on the back of the UT-301. Secure Universal Tablet Cradle to the mounting surface using four Pan Head Screws (Hardware Kit Item #3), four Flat Washers (Hardware Kit Item #4), and four Lock Washers, (Hardware Kit Item#5).

  • Page 5: Configuration

    Configuration Ensure the UT-301 Universal Tablet Cradle is unlatched by lifting the Latch Handle. Loosen the Upper Adjustment Knob and both Lower Adjustment Knobs, taking care not to back the lower Adjustment Knobs all the way out. Loosen the Center Adjustment Knob so the Legs and height can fully articulate.
  • Page 6 Configuration (continued) Place your tablet (landscape orientation) into the center of the Universal Tablet Cradle Legs. Adjust the Legs into a position such that the corners of tablet make contact with both sides of the Leg openings. Once the Legs are positioned, push up on the bottom of the Legs until the top of the tablet touches the Latch Handle, ensuring the Leg position is not disturbed.
  • Page 7 Configuration (continued) Tighten the Center Adjustment Knob by hand to secure the height and Leg positions. NOTE: Do not overtighten or damage to your Universal Tablet Cradle may result. Place the tablet back into the Universal Tablet Cradle, lower Latch Handle and double check that proper height and width has been set.
  • Page 8 Configuration (continued) With the tablet secured in the Docking Station, tighten the Upper Depth Adjustment Knob until the tablet is secure against the Latch Handle. NOTE: During normal use, the Upper & Lower Adjustment Knobs may need to be re-tightened. Your Universal Tablet Cradle is now configured for your tablet.

  • Page 9: Operation - Docking

    Pivot tablet so the top aligns with the Upper Depth Adjustment Knob at the top of the Universal Tablet Cradle. Rotate Latch Handle clockwise to secure tablet in place. For theft deterrence, secure tablet by locking Universal Tablet Cradle with supplied key (Hardware Kit Item 2). www.havis.com • 1-800-524-9900...

  • Page 10: Operation - Undocking

    Operation - Undocking If previously locked, unlock Universal Tablet Cradle using supplied key. While holding tablet with one hand, rotate Latch Handle counterclockwise. Once unlatched grab the side of tablet, rock the top forward and carefully lift out of the Universal Tablet Cradle.

  • Page 11: Cable Management

    Zip Tie (Hardware Kit Item #2) into the Strain Relief Hole on the bottom of the UT-301. Loop and tighten Zip Tie around cable as required. Be sure to allow enough power cable length to reach the tablet’s power connector without stretching the power cable.
  • Page 12 Related Products Havis offers a wide variety of accessory products for use with the UT-301 Universal Tablet Cradle. For more information or to order, please visit www.havis.com. DS-DA-218 Desktop Stand Durable stand for mounting the Universal Tablet Cradle in the home or office.