Important Notes 1. The specified voltage must match the mains voltage. Use an adequate wire cross-section. 2. The appliance air inlet and outlet openings must not be obstructed in any way! 3. Never move the heater during operating, always unplug heater when not in use. 4.
• Do not place the heater on bedding or on thick and long pile carpet where the openings may be blocked. • To reduce the risk of electric shock, do not immerse or expose the product or flexible cord to rain, moisture or any liquid other than those necessary for correct operation of the product.
Page 4
Features Top cover Air inlet Control panel Air outlet Mode button Timer button Remote control Swing button On/Off button...
Before First Use 1. Before use, remove all packaging and inspect the appliance for any damage. If there appears to be any damage, please take the unit back to place of purchase for a replacement. 2. Ensure that all the accessories are included as per diagram above before you can continue with the installation.
Operating Instructions Before inserting the plug into a power outlet, make sure that the correct voltage being used corresponds to what is indicated on the rating label, and that the socket has an earth facility. Plug the unit into the main power supply, and then switch ON the main power supply Control panel for Manual operation.
5. To switch the heater OFF anytime, press button until the “FAN” indicator flashes. The fan heater will continue to operate for 10 -15 sec, and then it will switch OFF. Remote: 1. Press button, the heater will switch ON and the fan will blow. 2.
Please dismount the heater and store in a dry place away from sunlight and dirt. Specifications Model Description Voltage Frequency Wattage CWH20NS 2000W Ceramic Wall heater with Remote Control 220-240V~ 50Hz 2000W Hints & Tips 1. Do not overheat your home, in winter the temperature of a heated room should be between 18- 21°C...
Need help?
Do you have a question about the CWH20NS and is the answer not in the manual?
Questions and answers