Apogee HANDMIC DIGITAL Quick Manual

HANDMIC DIGITAL
Quick Guide
In the box
1 HANDMIC DIGITAL microphone
1 Cable 2m, Micro USB/Lightning
1 Cable 2m, Micro USB/USB
1 Microphone clamp
1 Microphone table stand
1 Pouch
1 Quick Guide
1 Safety Guide
Requirements
iOS version: 9 or later
Mac OS version: 10.7.5 or later
PC Version: Windows Vista or later
Connection / Power: Lightning, USB 1.0 or later
Setup
Connecting
1
If you are using a headset,
(1) first connect the headset,
(2) then connect the HANDMIC DIGITAL to the
recording device.
Connect the Micro USB connector to the HANDMIC
DIGITAL.
Important for iOS Devices
Wrong chosen audio source can reduce the
recording quality.
The last connected microphone will be used as the
audio source. If you are using your headset for input
monitoring, you might record unintentionally via the
headset microphone. To avoid this:
Connect your headphone or headset to your iOS
device first before connecting the HANDMIC DIGITAL
to the Lightning port.
Ensure that the apps detect the HANDMIC DIGITAL as
the last connected microphone.
Overview
Apogee PureDigital Enhanced
A/D conversion circuitry inside
Micro USB to
Lightning/USB
connector
Connect the HANDMIC DIGITAL to your iOS device,
Mac or Windows PC.
Lightning port
USB port
By default, you will not hear the HANDMIC DIGITAL until input
monitoring is enabled in an app.
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com
Printed in Germany, Publ. 06/17, 571329/A01
Sound inlet
basket
LED
Microphone clamp
Microphone table stand