Trox EM-LON Installation Manual

Lonworks interface for easylab controller tcu3 and adapter module tam firmware from 4.0
Hide thumbs Also See for EM-LON:

Advertisement

Installation manual
GB/en
Expansion module
EM-LON
LonWorks interface
for EASYLAB controller TCU3 and adapter module TAM
Firmware from 4.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EM-LON and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Trox EM-LON

  • Page 1 Installation manual GB/en Expansion module EM-LON LonWorks interface for EASYLAB controller TCU3 and adapter module TAM Firmware from 4.0...
  • Page 2 TROX GmbH Heinrich-Trox-Platz 47504 Neukirchen-Vluyn Germany Telephone: +49 2845 202-0 Fax: +49 2845 202 265 email: trox@trox.de Internet: www.troxtechnik.com Translation of the original M375EV4, 2, GB/en 04/2018 © TROX GmbH 2017 Expansion module EM-LON...
  • Page 3: Table Of Contents

    Carrying the expansion module....10 Storage ............. 10 Installation..........11 Commissioning / Configuration..... 13 Required TCU3 software version ....13 Interface information....... 13 Removal and disposal......14 Safety notes regarding removal and dis- posal............14 Removal............. 14 Disposal............. 14 Expansion module EM-LON...
  • Page 4: Important Notes

    To ensure that your request is processed as quickly as possible, please keep the following information This manual enables operating or service personnel ready: to correctly install EM-LON and to use it safely and efficiently. Product name  TROX order number ...
  • Page 5: Safety

    ENVIRONMENT! Environmental pollution hazard. Earthing Correct use EM-LON provides a LonWorks interface for EASYLAB base components. Use the expansion module only for an EASYLAB TCU3 controller or a TAM adapter module. This symbol marks all equipotential bonding con- nection points on EM-LON.
  • Page 6: Residual Risks

    Risk of damage to property due to large tem- perature differences Qualified staff If EM-LON has been kept in an unheated area, Qualification condensation may form and damage the elec- tronic components beyond repair. The work described in this manual has to be carried out by individuals with the qualification, training, –...
  • Page 7: Environmental Protection

    ⑤ ④ ③ Environmental protection Fig. 1: EM-LON The following substances and materials which ① are hazardous to the environment are used in Plug base for connection with the EASYLAB main PCB this product: ②...
  • Page 8: Functional Description

    Structure and functional description Functional description The PCB contains terminals for the LonWorks net- work and a service pin push button with indicator Expansion module EM-LON provides the EASYLAB light. base components (controller TCU3 or adapter module TAM) with a LonWorks interface to link...
  • Page 9: Technical Data

    6 terminals for cable cross sections of 0.12 – 1.5 mm² (LON A, LON B and shielding, two of each)  Ä on page 11 Displays Ä ‘Status LEDs ’ on page 7 Two status indicator lights, Rx and Tx,  Expansion module EM-LON...
  • Page 10: Delivery And Storage

    Do not remove the protective wrapping until  just before installation. Storage If you need to store EM-LON, make sure that the following conditions apply: Store in its original (antistatic) packaging.  Do not store outdoors.
  • Page 11: Installation

    – Only skilled qualified electricians are allowed to work on live components. Expansion module EM-LON is to be fitted into the casing of a TCU3 controller or TAM adapter module. Electrostatic charge can damage the elec- tronics.
  • Page 12 Cables to DOCSIS specification level IV  JY(St)Y 2×2×0.8 (use only twisted pair  EM-LON has terminals for two data cables for LON-A and LON-B) of a LonWorks network. Depending on the network topology, controllers at the end of a...
  • Page 13: Commissioning / Configuration

    Commissioning / Configuration Commissioning / Configuration Required TCU3 software version Personnel: EM-LON with firmware 4.0 requires that TCU3 soft- Network administrator  ware 7.0 or higher is installed on the TCU3 con- troller or TAM adapter module. Commissioning the LonWorks interface requires...
  • Page 14: Removal And Disposal

    Have electronic waste and electronic com- ponents disposed of by an approved spe- cialist disposal company. – If you are not sure how to dispose of any- thing in an environmentally friendly manner, contact your local authorities or a specialist disposal company. Expansion module EM-LON...
  • Page 15 Expansion module EM-LON...
  • Page 16 Expansion module EM-LON...

Table of Contents