Table of Contents
Advertisement
Quick Links
Quick Start Guide
Front View
Touch
sensitive
screen
Graffiti
Home
Pad
Menu
Power
Directional
Arrows
1. Setup
2. Connect
Figure 1
3. Charging
Figure 3
Module Fasteners
MZIO™ Module
Infrared Port
Calculator
Find
Backlight
Center
Meazura™ Setup
When powering up your Meazura™ for the first time, press the Power button and follow the on-screen
instructions to setup the device. This includes calibration of the touch sensitive screen and setting your
location, date and time. During this procedure, you can at your option take a Graffiti writing tutorial
for entering text and special characters on your Meazura™.
PC Setup
To communicate between the Meazura™ and your PC, you must install
'Palm Desktop' located on your CD-ROM included with your kit.
1. Exit all programs, including those that may be running in the taskbar.
2. Insert the Meazura™ Software CD into your CD-ROM drive.
3. The install menu should appear automatically. If it doesn't then
navigate to 'install_menu.exe' located on your CD-ROM using
Windows Explorer.
4. Follow the on-screen instruction for installing 'Palm Desktop'.
• Plug the Communications cable into a USB or Serial port on your computer (as pictured
in figure 2a/b below).
• Connect the communications cable to the communication connector located at the bottom
of the Meazura™ (as pictured in figure 1 left).
• Ensure the Meazura™ Desktop Software CD-ROM is inserted into your computers CD-
ROM drive.
• Press the power button to turn on your Meazura™ and perform a HotSync operation
following the instructions in step 4 to commence the driver install for your Meazura™.
• Follow all instructions on your PC and your Meazura™.
USB Connection
• Connect your AC adaptor to the bottom of your communications cable (as pictured below
in figure 4).
• Connect the communications cable to the comms connector located at the bottom of your
Meazura™ (as pictured below in figure 4).
• Ensure your connection setup is the same as pictured in figure 3 left to commence charging.
Top View
Stylus
Bottom View
Figure 2a
Serial Connection
WARNING: For safety reasons, ensure the Meazura™ is
Figure 4
completely dry before using the electrical charger.
(Charging time varies depending on battery level)
Rear View
Battery Pack
Battery Clip
Communications and
Charging Connector
Figure 2b
Advertisement
Table of Contents
Related Manuals for Aceeca Meazura MEZ1000
Summary of Contents for Aceeca Meazura MEZ1000
-
Page 1: Front View
Quick Start Guide Front View Module Fasteners Rear View Top View MZIO™ Module Touch sensitive Infrared Port screen Stylus Battery Pack Graffiti Home Calculator Bottom View Menu Find Backlight Power Center Directional Battery Clip Arrows Communications and Charging Connector 1. Setup Meazura™... -
Page 2: Hard Reset
‘Done’. All Content Copyright © 2004 Aceeca Limited - All Rights Reserved. Aceeca, Meazura, MEZ1000 and RDA are all trademarks of Aceeca Limited. Palm OS, HotSync, Graffiti and the Palm Powered logo are registered tradem arks and Palm Powered is a trademark of Palm Trademark Holding Company, LLC. and are used by Aceeca Limited under express license with PalmSource, Inc.
Need help?
Do you have a question about the Meazura MEZ1000 and is the answer not in the manual?
Questions and answers
TOUCH SCREEN NOT WORKING,HOW TO RECTIFY IT
To fix a non-working touch screen on the Aceeca MEZ1000, try the following:
1. Press the Power button to restart the device.
2. If the screen responds, follow the on-screen instructions to recalibrate the touch screen.
3. If the screen still does not work, ensure the battery is charged and properly connected.
4. If the issue continues, a hardware repair may be needed.
If the touch screen does not respond at all, and calibration is not possible, the device may require professional servicing.
This answer is automatically generated