Download Print this page

Zaxcom Nomad User Manual

Hide thumbs Also See for Nomad:

Download this manual See also: User Manual

USER MANUAL

Published August 2014

Software Version Nomad 7.10

Nomad USB Keyboard

The Power Is In Your Fingers

Page 1 USER MANUAL Published August 2014 Software Version Nomad 7.10 Nomad USB Keyboard The Power Is In Your Fingers...
Page 2: System Requirements
With Nomad powered down plug a USB keyboard into the USB port then power up your nomad as normal. Approximately 30 seconds after boot-up Nomad will identify the attached keyboard and “Found Keyboard” will flash once on the meter screen. If the keyboard is not found you may need to power cycle your Nomad. Using the Keyboard After the keyboard is identified you can begin navigation and control.
Page 3: Keyboard Shortcuts
Then select the input to listen to by pressing the number keys 1 through 8. PFL Nomad faders CTRL+ Pressing CTRL + a number key will toggle through inputs assigned to the Nomad faders. PFL FP8 faders ALT+ Pressing ALT + the number key will toggle through the inputs for the FP8 faders.