Additional Information - LG LAS453B Simple Manual

Front Panel
· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Power On /Off
· · · · · · · · · · · · · · · · · · · · · · · · · · · · · Selects Function
· · · · · · · · · · · · · · · · · · · · · · · · ·
Adjusts Volume
Rear Panel
PORT. IN · · · · · · · · · · · · Connect to a Portable device
OPTICAL IN · · · · · · · · · · Connect to an Optical device
For more information, download the online owner' s manual. http://www.lg.com
1 Subwoofer Connection
Place the wireless subwoofer near the sound bar and
follow steps below.
a Connect the power cord of wireless
subwoofer to the outlet.
b Turn on the sound bar :
The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's
yellow - green LED turns on..
Subwoofer Connection Manually
a
Reset the Subwoofer
If the yellow - green LED on the subwoofer
blinks quickly, skip this step and go to b
y Press and hold PAIRING button for 5
seconds.
y The LED lights up alternately in red and
yellow - green.
y Unplug the power cord. Then after the LED
turns off completely, plug in the power cord in
again.
When the reset is completed, the subwoofer's
yellow - green LED blinks quickly.
b Reset the sound bar
y Adjust volume to minimum until the red LED
on the sound bar lights up for a while.
y Press and hold (Mute) button on the remote
control for 3 seconds.
y The red LED on the sound bar will blinks
quickly.
y Turn the sound bar' s power off, then back on
again whilst the subwoofer' s LED blinks
yellow - green
When the connection is completed, you can see the
yellow - green LED on the subwoofer.
Keep the sound bar and the subwoofer 1m
or more away from other device (ex. wireless
router, microwave oven, etc.) to prevent any
wireless interference.
2 TV Connection
a
Connect the the sound bar to the TV using
Optical cable.
b Set up [External Speaker (Optical)] on your TV
setting menu.
TV
Addtional Device Connection
a Connect to the external device as follows.
(Set-top
Box, Player
etc.)
TV
b Set the input source by pressing F on the
remote control or unit repeatedly.
Remote Control
Remote control
STANDARD/VOICE/CINEMA : Selects sound effect.
DRC ON/OFF: Makes comfortable sound at Dolby Digital.
WOOFER LEVEL +/-: Adjusts the volume level of sub-
woofer.
AUTO POWER ON/OFF: Automatically turns on by an
input source.
Replacement of battery

Additional Information

Specification
Power
Refer to the main label.
requirements
Refer to the main label.
Power
Networked standby : 0.5 W
consumption
(If all network ports are
activated.)
Dimensions Approx.
(W x H x D) 950 mm x 71 mm x 47 mm
Net Weight Approx. 2.47 kg
Amplifier
(Total RMS 200 W
Output power)
Design and specifications are subject to change
without notice.
How to disconnect the wireless net-
work connection or the wireless device
Set up the AUTO POWER ON/OFF function to off
and turn off the unit.