Lifting And Moving The Monitor Set; Setting Up The Monitor Set; Attaching The Stand Base; Detaching The Stand Base And Body - LG M2241A Owner's Manual

Lifting and moving the
Monitor set
When moving or lifting the Monitor set, read the
following to prevent the Monitor set from being
scratched or damaged and for save transportation
regardless of its type and size.
CAUTION
Avoid touching the screen at all times, as
this may result in damage to the screen or
some of the pixels used to create images.
It is recommended to move the Monitor
y
set in the box or packing material that the
Monitor set originally came in.
Before moving or lifting the Monitor set,
y
disconnect the power cord and all cables.
Hold the top and bottom of the Monitor
y
set frame firmly. Make sure not to hold the
transparent part, speaker, or speaker grill
area.
When holding the Monitor set, the screen
y
should face away from you to prevent the
screen from scratches.
When transporting the Monitor set, do not
y
expose the Monitor set to jolts or excessive
vibration.
When transporting the Monitor set, keep the
y
Monitor set upright, never turn the Monitor
set on its side, or tilt towards the left or right.
ASSEMBLING AND PREPARING

Setting up the Monitor set

Attaching the Stand Base

1
Place the Monitor set with the screen side
down on a flat and cushioned surface.
CAUTION
Lay a foam mat or soft protective cloth
on the surface to protect the screen
from damage.
2
Attach the Stand Base from the set by turning
the screw to the right with a Coin.

Detaching the Stand Base and Body

1
Place the Monitor set with the screen side
down on a flat and cushioned surface.
2
Turn the screw to the left, and then pull out
the Stand Base from the Stand Body.
5