Advertisement
USER MANUAL
Reading the time
(1)
(2)
(3)
The continuous second is displayed with
a rotating disk.
The s- means that this destination is
subject to DST (daylight saving time).
During DST turn always the bezel to the
s-Position.
Setting the time
(1)
(2)
(3)
(4)
(position B is not functional)
the watch always indicates the time
of the destination set at 12 o'clock.
the watch has a 2
nd
which indicates a.m. or p.m. at the
destination set at 12 o'clock.
the bezel and the watch are currently
set for london and the time is 10:10
a.m.
make sure that the bezel is set on the
desired destination.
pull the crown out to position C
turn it until the desired time is reached.
push the crown back to position a.
hour hand
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Vogard Chronozoner
-
Page 1: User Manual
USER MANUAL Reading the time the watch always indicates the time of the destination set at 12 o’clock. the watch has a 2 hour hand which indicates a.m. or p.m. at the destination set at 12 o’clock. the bezel and the watch are currently set for london and the time is 10:10 a.m. - Page 2 Changing the destination the bezel and the watch are currently set for london and the time is 10:10 a.m. open the handle...
- Page 3 turn the bezel and choose the desired destination at 12 o’clock. Close the handle read the time at the new destination. the watch is now set for rio and the time is 07.10 a.m. Note: During DST turn the bezel to the s-Position as Rio is a destination subject to DST.
-
Page 4: Using The Chronograph
Using the chronograph (p1) to start the chronographs press on pedal p1. to stop the chronographs press again on pedal p1. (p2) a single press on the pedal p2 returns to zero all hands. this return-to-zero is only possible if the chronograph has been stopped with a press on pedal Reading the chrono time...
Need help?
Do you have a question about the Chronozoner and is the answer not in the manual?
Questions and answers