pswpower KT-LCD1 User Manual

KT-LCD1 e-Bike Display User Manual
Dear customer, please read this manual before you use KT-LCD1 instrument. The manual will guide
you use the instrument correctly to achieve a variety of vehicle control and vehicle status displays.
Functions and Display
1
UP button
2
SW button
3
DOWN button
4
Battery capacity indicator
KM/H
Riding speed(metric)
MPH
Riding speed (imperial)
5
MXS
MAX speed
AVS
Average speed
Operation
1. ON/OFF
Hold button long to turn on the power, and hold
off the power. When the motor stops driving and when the e-bike is not used for a consecutive 5
minutes, it will automatically shut down and turn off the motor power supply.
2. Display interface
2.1 Turn on backlight and headlights
Hold button long to turn on backlight and headlights (the controller should have headlight
TM
Single trip time
6
TTM
Total trip time
7
6KM/H push power assist
Km
Distance(metric)
Mil
Distance (imperial)
8
DST
Trip distance
ODO
Total distance
9 ASSIST
Pas level
button long for a second time to turn
Hold button to start up and enter display interface.
V2.5 drive output function); hold
2.2 Assist ratio gear (ASSIST) switch
2.3 6KM/H assist promotion function
2.4 Display and delete of single data
2.5 Display of total trip time and distance
2.6 Display of single maximum speed and average speed
button long again to turn off the backlight and headlights.
Hold or button shortly to switch 1-5 file gear. Gear
1 is for the minimum power, gear 5 is for the highest power. Each
startup will automatically restore the gear shutdown last time.
Gear 0 is without booster function.
Hold button and flashes, the vehicle drives at the
speed not more than 6Km/h. Release
invalid.
After power on for 5 seconds, hold
the same time, single trip riding time (TM) and single trip distance
(DST) flash, hold button shortly, the content of both is
cleared. If failed holding the button within 5 seconds, it will
automatically return the display interface after 5 seconds, original
content is preserved.
Hold button shortly to display of total trip time (TTM)
and total trip distance (ODO). hold
return the display interface. In the riding mode after 5 seconds,
automatically returns to display interface.
In the display of total trip time and distance, hold
button shortly to display of single maximum speed (MXS)and
average speed (AVS). hold button shortly again to return the
display interface. In the riding condition, 5 seconds later,
automatically returns to display interface.
button, the function is
and button at
button shortly again to
or