Radio Shack 6301464 User Manual

We hope you enjoy your Talking Watch from
RadioShack. This watch announces the time
with the push of a button, and provides dual
time zones, daily calendar, countdown timer,
6301464
and full-function alarm with 4-minute snooze.
TM
Please read this user's guide before using your
new watch.
Talking Watch
Package Contents
User's Guide
• Talking Watch
• Button-Cell Battery (installed)
• User's Guide
Turn on the Watch
Press and hold TALKING for 3 seconds.
Specifications
Power Source .................. Lithium CR2025 battery
Accuracy ............................................. ±1 second/day
Battery Life ...........................................approx. 1 year
.......................... (one alarm for 60 seconds per day)
Wristband Length .............................9.45 in. (24cm)
Specifications are subject to change and improvement
without notice. Actual product may vary from the images
found in this document.
6301464_UG_EN_121714.indd 1-6
MODE TALKING
Toggle: Announce:
• Time 1 (T-1) • Current time
• Time 2 (T-2) • Alarm time
• Timer • Hour format
• Alarm • Remaining time
• Hour
format
ADJ
• In T-1/T-2 Mode:
Select alarm and
SET
snooze options.
• Toggle between
• In Set Modes: Adjust
Time 1 (T-1) and
hour, minute, time
Time 2 (T-2).
zone, hour format.
• Enter time-setting
• In Timer Mode: Start
mode.
or stop countdown.
2 3
Set the Date and Time
You can set the date and time for two different
time zones, shown as T-1 and T-2.
1. Press MODE repeatedly
until you enter Time 1 or
Time 2 mode. T-1 or T-2
displays, and the watch
announces the current time.
2. Press and hold SET for 3
(in timer mode)
seconds to enter time-
setting mode. The hour digits flash.
3. Press ADJ repeatedly to set the hour, or press
and hold to adjust quickly.
4. Press SET. The minute digits flash.
5. Repeat steps 3 – 4 to set the minute, year,
month, and day.
6. Press MODE to confirm and exit setting mode.
Notes:
• The calendar includes dates from years 2000
to 2099.
• After you set the date, the watch
automatically sets the day of week.
• If you do not press a button for more than
1 minute, the watch returns to the current
time display.
4
Set the Timer 6. Press ADJ to stop or pause countdown.
Press ADJ again to continue countdown.
The countdown timer has a maximum
7. When the countdown ends, the watch beeps
countdown time of 23 hours, 59 minutes.
for 60 seconds. Press any button to stop the
1. Press MODE repeatedly
beeps.
until you enter timer mode.
8. To reset the timer to 0:00:00, press
TIMER displays, and the
TALKING twice after the countdown ends.
watch beeps twice.
Notes:
2. Press and hold SET for 3
seconds to enter time- • Press TALKING to turn the voice
setting mode. The hour announcement on or off when less than
digits flash. 1 minute remaining.
3. Press ADJ repeatedly to set the hour, then • During the countdown, press MODE to use
press SET. The minute digits flash. the watch's other features.
4. Press ADJ repeatedly to set the minute, then
Set the Alarm
press MODE to confirm.
5. Press ADJ to start the countdown. The watch
To Set the Alarm Time
announces remaining time at set intervals.
1. Press MODE repeatedly until you enter alarm
mode. AL. displays, and the watch beeps
Remaining Time Announcement
three times.
20 to 60 minutes Every 10 minutes
2. Press and hold SET for 3 seconds to enter
10 to 20 minutes Every 5 minutes
time-setting mode. The hour digits flash.
1 to 10 minutes Every 2 minutes 3. Press ADJ repeatedly to set the hour, then
press SET. The minute digits flash.
10 to 60 seconds Every 5 seconds
4. Press ADJ repeatedly to set the minute, then
0 to 10 seconds Every second
press SET. T-1 or T-2 flashes.
5 6
12/18/2014 4:59:18 PM