Incept Tasman K40S Manual

Inflatable sea kayak 4.30 m, 1-person

Advertisement

K40S
Tasman
Inflatable Sea Kayak
4.30 m, 1-person
Incept Marine Ltd
126 Hautapu Street, Taihape 4720, New Zealand.
ph ++64 6 388-0729
fx ++64 6 388-0747
email: sales@incept.co.nz

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Tasman K40S and is the answer not in the manual?

Questions and answers

Summary of Contents for Incept Tasman K40S

  • Page 1 K40S Tasman Inflatable Sea Kayak 4.30 m, 1-person Incept Marine Ltd 126 Hautapu Street, Taihape 4720, New Zealand. ph ++64 6 388-0729 fx ++64 6 388-0747 email: sales@incept.co.nz...
  • Page 2 Made of durable reinforced polyurethane alloy, given basic care the boat material will take the knocks and give exceptional service. Truly a jet-setting kayak, the Incept K40S Tasman will repay your choice with reliable and happy boating for many years.
  • Page 3 (includes all fittings and pump) INTERNAL The Incept K40S inflatable sea kayak is constructed from a heavy duty and light weight Polyurethane alloy boat material designed for Incept’s back-packable wilderness boats. It has 1100 dtex Polyester reinforcing, is exceptionally strong and hard wearing, and is protected to withstand New Zealand’s extreme UV exposure.
  • Page 4 The seat cushion valve is positioned between the legs so it can be opened at sea for adjustment if you need it. A small amount of adjustment is possible. The top of backrest should be partially under the rear deck. •...
  • Page 5: Boat Handling

    The leaflet "A Basic Guide to Safe Sea Kayaking" is included with this manual. If this should be missing, or additional copies are needed, please contact the agent who sold you this kayak or Incept Marine Ltd or the Kiwi Association of Sea Kayakers, PO Box 23, Runanga 7854, West Coast, New Zealand.
  • Page 6 CARE CLEANING & MAINTENANCE: Use warm soapy water or light abrasive cleanser to remove dirt and stains. Periodically clean and if necessary lubricate the zippers with a silicone spray. Remove sand and gravel which may accumulate between the floor and the sidewalls. Lubricate control lines with silicone where they pass through the guides.
  • Page 7 Any manufacturing defects in materials or workmanship found during the warranty period will be made good by Incept Marine Ltd at no cost, provided only that the boat is returned to the nearest Incept repair station, freight paid. Call...
  • Page 8 [Mk 6 K50D Pacific Double, Stewart Island New Zealand] K40S Tasman INCEPT - proudly made in New Zealand by Incept - INC39 BOAT SERIAL No. PURCHASE DATE Copyright Incept Marine Ltd 2008...

Table of Contents