Related Manuals for Zetta ZIR32
Summary of Contents for Zetta ZIR32
- Page 1 Zetta ZIR32 remote control user manual Step 1. Remote control receiver cable connection Open the orange receiver casing, and connect the 4-wire cable as below...
- Page 2 2. ZIR32 connection Open the screw cover and connect the 4-wire cable as below Wire color ZIR32 connector pin 1 (Power Out) Black 2 (Ground) Yellow 3 (ZIR32 Trigger in+) Green 4 (ZIR32 Trigger in-)
- Page 3 7. Testing: Insert a FAT32-formatted microSD card into ZIR32 and turn on the ZIR32, wait for the green LED flashes and then off. It is in standby mode now. Press the “ON” button on the remote control transmitter, the ZIR32 should wake up and then green light should be flashing.