Table of Contents
Advertisement
Quick Links
900 PEAK AMP
PORTABLE JUMP STARTER
Item Number W1665
OWNER'S MANUAL
WARNING
It is the owner and/or operators' responsibility to study all WARNINGS, operating, and
maintenance instructions contained on the product label and instruction manual prior to
operation of this product. The owner/operator shall retain product instructions for future
reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or
warning labels and while in use, maintaining the unit in good working order. Safety
information shall be emphasized and understood prior to usage. The product shall be
inspected per the operating instructions.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
Advertisement
Table of Contents
Summary of Contents for Perfomance Tool W1665
- Page 1 900 PEAK AMP PORTABLE JUMP STARTER Item Number W1665 OWNER’S MANUAL WARNING It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance instructions contained on the product label and instruction manual prior to operation of this product. The owner/operator shall retain product instructions for future reference.
- Page 2 OPERATING THIS PRODUCT. FAILURE TO DO SO MAY RESULT IN FIRE, ELECTRICAL SHOCK, PERSONAL INJURY AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY. • The W1665 Jump-starter, must only be used for its intended purpose. Follow the guide lines of this instruction manual. • This product should never be used in a commercial environment •...
- Page 3 USAGE INSTRUCTIONS The W1666 Jump Starter is designed as a compact, portable booster system. Ideally designed for vehicles, boats and just about anything powered by a 12-volt battery. This self-contained system will start most vehicles and boats without the need for a host vehicle or booster cables. This system can also be used as a safe, portable source of 12 volt DC electric power.
- Page 4 PARTS LISTING Figure 1. Figure 2.
- Page 5 PARTS LISTING 1. Impact resistant polyethylene case 9. DC charging LED and receptacle for charging plug 2. Two 12 Volt output sockets 10. Dial gauge 3. Color-coded battery meter 11. Air compressor switch 4. On/Off safe switch for the jumper cables 12.
- Page 6 OPERATION To use your Jump Starter as a 12V DC/DC power source: 1. Lift up the cover of one of the 12V DC receptacles (No.1, see figure #1). 2. Insert the 12V DC plug adapter from the appliance into the 12V DC power receptacle on the side of your Jump Starter (No.1, see figure #1) The following table will give you an idea of the operation time you can expect when starting from a fully charged system.
- Page 7 BATTERY DISPOSAL The lead acid battery contained in the power booster jump start system should be recycled once it has expired. Please contact your local solid waste authority for recycling information. WARNING: Do NOT dispose of the battery in an open flame as this may result in an explosion. WARNING: Before disposing of the battery, protect exposed terminals with heavy-duty electrical tape to prevent shorting (shorting can result in injury or fire).
- Page 8 1 YEAR LIMITED WARRANTY PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers. These warranties give specific legal rights. Except where prohibited by local law, the law of the State of Washington governs all warranties and all exclusions and limitations of warranties and remedies.
Need help?
Do you have a question about the W1665 and is the answer not in the manual?
Questions and answers