Download Print this page

JetBlack Z1-Pro-Fluid Manual

With sqr fit system + app

Advertisement

Quick Links

with SQR Fit System + APP
1) WARNING
• Read and follow all instructions concerning trainer setup and installation of your
bicycle into the trainer. Failure to securely attach the bicycle to the trainer could result
in serious injury to the rider or bystanders.
• Remove all oils and moisture from the roller and the tyre before use.
• Keep both hands on handlebar at all times.
• Do not over-tighten the adjustment knobs. Over tightening may cause damage to the
trainer or your bicycle frame. The clamp handles should be firm and secure. Do NOT
force!
• Regularly check your trainer, particularly the mounting system, for damage. If you think
your trainer may be damaged, do not use it and contact your supplier.
• Always take care when training to prevent children or pets moving close to the trainer.
• Do not use hard, specialty compound trainer tyres on the hydrogel roller. We have
specially engineered the orange roller to reduce tyre wear and noise, eliminating the
need for trainer tyres. Tyre wear with correct setup will be similar to that of riding on
the road. Using a hard compound trainer specific tyre will cause slipping on the roller,
which could cause permanent damage to the orange hydrogel roller. Use of hard
compound trainer specific tyres is not covered by warranty.
2) CAUTION
• This trainer is intended for single-rider bicycles only.
• Read and follow all instructions.
• Before beginning each workout, be sure the bicycle is securely attached to the trainer.
• Ensure you always use the trainer on a flat surface.
• Do not put fingers, feet or dangling objects near any moving parts.
• Do not attempt to dismount until all moving parts have come to a standstill.
• Do not attempt to modify your JetBlack trainer.
• Do not attempt to stop the resistance unit or flywheel manually.
• Resistance unit can become hot enough to cause burns. Do not touch resistance unit
during use and for some period after use, until it has had sufficient time to cool.
• Keep children and pets away from the trainer during use.
• Before you start any exercise program you should consult a physician. Should you
become ill, feel dizzy, light-headed or nauseous while riding the trainer, stop riding
immediately and seek medical attention.
• The roller adjustment knob must be tightened correctly to prevent damage to the
trainer.
www.jetblackcycling.com
info@jetblackcycling.com
JBT-Z1FLUIDPRO

Advertisement

loading

Summary of Contents for JetBlack Z1-Pro-Fluid

  • Page 1 • Always take care when training to prevent children or pets moving close to the trainer. • Do not use hard, specialty compound trainer tyres on the hydrogel roller. We have specially engineered the orange roller to reduce tyre wear and noise, eliminating the need for trainer tyres. Tyre wear with correct setup will be similar to that of riding on the road. Using a hard compound trainer specific tyre will cause slipping on the roller, which could cause permanent damage to the orange hydrogel roller. Use of hard compound trainer specific tyres is not covered by warranty. 2) CAUTION • This trainer is intended for single-rider bicycles only. • Read and follow all instructions. • Before beginning each workout, be sure the bicycle is securely attached to the trainer. • Ensure you always use the trainer on a flat surface. • Do not put fingers, feet or dangling objects near any moving parts. • Do not attempt to dismount until all moving parts have come to a standstill. • Do not attempt to modify your JetBlack trainer. • Do not attempt to stop the resistance unit or flywheel manually. • Resistance unit can become hot enough to cause burns. Do not touch resistance unit during use and for some period after use, until it has had sufficient time to cool. • Keep children and pets away from the trainer during use. • Before you start any exercise program you should consult a physician. Should you become ill, feel dizzy, light-headed or nauseous while riding the trainer, stop riding immediately and seek medical attention. • The roller adjustment knob must be tightened correctly to prevent damage to the trainer.
  • Page 2 Thru Axle 12x142mm • Ensure the nuts on your axle are tightened securely Table 1. Other Greater than 142mm • Check that the nut and axle nests into the axle support cups by more than 5mm (3/16 EASY TO ROTATE Figure 7. inch) IMPORTANT: Quick Release Skewer Ensure that your tyre is centred on the orange roller to within 10mm (3/8 inch) from the • JetBlack strongly suggests you use the supplied quick release skewer (for those centre of the orange roller. Your tyre must have a minimum 5mm (3/16 inch) clearance FIRM TO CLOSE bicycles that use QR systems from the metal (silver coloured) roller frame. See figure 6. • Replace the bicycle’s rear wheel quick release (QR) skewer with the one provided. See *Table 1 is a guide for attaining lever pin positions (1~4) for common bicycles and can your bicycle owner’s manual for instructions on how to properly adjust the QR skewer. be used as a starting point for other bicycle axle configurations. Some bikes may require • The skewer lever must be on the non-drive side of your bicycle (the left hand side). moving the pin one hole either side to centre the tyre on the orange roller. • Your skewer must be tight and your wheel must be aligned properly in the bicycle.
  • Page 3 It is the responsibility of the purchaser to retain receipts for proof of purchase in the event JBT-71 that warranty is required. Returning goods to JetBlack or the place of purchase is done at JBT-70 JBT-74 the owner’s expense. If you experience problems with your trainer, please email us at JBT-69 info@jetblackcycling.com JBT-21C FREE JETBLACK TRAINING APP JBT-45B JBT-21B New and exclusive to JetBlack! JBT-21C Free app for iOS or Android with Multiple coaching sessions crafted by Olympic cycle JBT-21B coach Murray Healey. JBT-69 • Upload your workout to Training Peaks and Strava! JBT-21C • Test and monitor yourself with an in built Fitness/Zone test and Training Zone calculator • View: Gear Recommendations, Goal Cadence, Session Time, Session Profiles. Optional JBT-21B accessories allow upgrades to include, Speed, Cadence, Heart Rate, Power (watts) Z1-PRO FLUID - TRAINER PARTS...

This manual is also suitable for:

Jb m5-pro