Avita CN6314F551 Manual page 5

Sar
The radiated output power of this device is below the FCC radio
frequency exposure limits. Nevertheless, the device should be used
in such a manner that the potential for human contact is minimized
during normal operation.The exposure standard for wireless devices
employs a unit of measurement known as the Specific Absorption
Rate, or SAR. The SAR limit set by the FCC is 1.6 W/Kg. Tests for SAR
are conducted using standard operating positions accepted by the
FCC with the device transmitting at its highest certified power level
in all tested frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the device while
operating can be well below the maximum value. This is because the
device is designed to operate at multiple power levels so as to use only
the power required to reach the network. In general, the closer you
are to a wireless base station antenna, the lower the power output. To
avoid the possibility of exceeding the FCC radio frequency exposure
limits, human proximity to the antenna should be minimized.
For body worn operation, this device has been tested and meets the
FCC RF exposure.
Warning: the aC adapter is used as disconnect device and it should
remain readily operable during intended use. In order to disconnect
the mains plug from mains completely, the aC adapter should be
disconnected from the mains socket outlet completely. The socket-
outlet shall be installed near the equipment and shall be easily
accessible.
CN6314 F551 e-manual
5