Download Print this page

Advertisement

Quick Links

Soda Maker
Instruction Manual
Read this booklet thoroughly before using and save it for future reference
Recycle used batteries,
paper and plastic.
Model: TM-SAU02W
V1.0
801

Advertisement

loading

Summary of Contents for THOMSON TM-SAU02W

  • Page 1 Soda Maker Instruction Manual Model: TM-SAU02W Read this booklet thoroughly before using and save it for future reference Recycle used batteries, V1.0 paper and plastic.
  • Page 2: Table Of Contents

    Table of Contents 1. Disclaimer 2. Emergency Handling & Warnings 2 3. Safety Precautions 4. Feature Descriptions 5. Part Names 6. Installation 7. Instructions 8. Simple Troubleshooting Disclaimer Declaration: This manual has been reviewed and proofread carefully; however, typographical and technical errors may still remain.
  • Page 3: Emergency Handling & Warnings

    Emergency Handling & Warnings Contact the customer service hotline of our company or a dealer nearby when abnormalities occur. Do not expose this machine to rain or humidity. Safety Precautions Soda Maker Clean with a wet cloth; mild cleansers may be used.
  • Page 4 Safety Precautions Soda Maker Usage This Soda Maker is specifically for making carbonated beverages. This device cannot be used with other liquids or prepared beverages such as juices, beer or wine, etc. Do not place the equipment near heat sources; avoid exposure to direct sunlight. Place the machine on a flat and waterproof surface every time it is used;...
  • Page 5: Feature Descriptions

    Feature Descriptions 1. Food grade CO2 with purity up to 99.9% 2. Zero power consumption, safe, portable, DIY with no added chemical ingredients. 3. Passed SGS food grade material certification. 4. Original connector with even bubbles. 5. Carbonator can be used repeatedly; healthy and environmentally friendly.
  • Page 6: Installation

    Installation 1- Peel the 2- Push the rear 3- Align the CO2 * Confirm the 4- Cover the rear transparent film cover latch; carbonator O-shaped ring cover and start on the CO2 press with the body is around the using carbonator off;...
  • Page 7: Instructions

    Instructions 1-Add water into the carbonating bottle; do not exceed the fill line. 2-Install the carbonating bottle onto the Soda Maker; rotate it counterclockwise to fix it into place. Confirm that the carbonating bottle is properly installed before carbonating. Caution, do not carbonate under the following conditions: 1.
  • Page 8 Instructions Reminder: To prevent damaging the carbonating bottle, adding flavoring syrup in another container (glass bottle or cup) after making sparkling water is recommended. Use cold water between 5-10°C to give it a better taste when drinking. Preparation of an extra CO2 carbonator for replacement at all times is recommended.
  • Page 9: Simple Troubleshooting

    Simple Troubleshooting Problem Possible Cause Solution Water overflows when using The carbonating button was 1. Press the pressure release button to release the machine. pressed for too long. excess CO2 The water was too full. 2. The correct carbonating method is to press the carbonating button for 0.5 seconds each time for 2-3 times;...