Page 1
SilverOnyx 5 Speed Air Purifier User Manual - Version 1.3 - Store in a safe place for future reference.
Page 2
CongratulaBons! Dear Customer, CongratulaBons on your purchase of the SilverOnyx 5 Speed Air Purifier. This product is meBculously designed with high quality materials and components. Please read the user manual carefully to familiarize yourself with the special features and funcBons.
KEY FEATURES ◇ High Airflow Rate: 140m ◇ Very Low Noise: <25dB(A); Quieter than ambient noise ◇ AhracBve Design: elegant and cozy, creaBng a favorable environment for your bedroom and office ◇ EffecBve: excellent air flow rate with true HEPA filtraBon and acBvated carbon to make your room free from dust and odor ◇...
COMPONENTS Control Panel Upper outlet Side outlet Anion Generator Shell Base Air Quality indicator Lamp PM2.5 Sensor Cover Power Switch Power Input ConnecBng Port Back Air Inlet Duct...
Page 6
Filter Rotate to open Base Cover Composite Filter UV Lamp Control Panel Timer & Filter Life Display Reset Filters Buhon Timer Switch Fan Speed Indicator Lights On/Off Auto Mode Power Buhon Buhon Anion Generator Air Quality On/Off Buhon Indicator Sleep Mode ...
GETTING STARTED 1. Aoer unpacking, place purifier upside down on a soo, level surface. 2. Rotate the base cover counter-clockwise to access the filter. 3. Remove the protecBve packaging from the filter and place back in the purifier - rotate clockwise to secure. 4.
OPERATING INSTRUCTIONS Start: Aoer main power is switched on, press the Power buhon. The unit will beep and the Air Quality indicator Lamp will light up. The purifier will start in AUTO mode. Auto Mode: Press the Auto buhon when the unit is in another mode and it will switch to Auto.
Page 9
Sleep Mode: Press the Sleep buhon aoer startup or while in another mode and it will switch to sleep mode. In this mode the Sleep Indicator will light, the lights will dim, and the air purifier will run on the lowest fan speed. Manual Mode: Press the Air Flow buhon aoer startup or while in another mode and it will switch to manual mode.
Page 10
Anion Generator: The Anion Generator uses high voltage to ionize (electrically charge) air molecules that will ahach to/deacBvate airborne parBcles. Press the Vita Ion buhon aoer startup or while in another mode and the indicator will light while the anion generator is releasing anions.
◇ Do not use water to wash the filter. ◇ Filter may damage easily - use cauBon during handling, and replace immediately if damaged. *Replacement filters can be purchased on our website at hhp://www.silveronyx.com U 1 1...
Page 12
PM2.5 SENSOR ◇ Keep surface of the sensor clean, or sensiBvity is affected and may fail to funcBon properly. ◇ It is recommended to clean the PM2.5 sensor each Bme you replace the HEPA filter cartridge: 1. Place the scoop end of a spoon under the tab at the bohom of the cover and push down on handle 2.
TROUBLESHOOTING Problem Reason & SoluBon ● Smell The filter may be too dirty if not replaced for a long Bme. Replace the filter. ● Using the air purifier in moist condiBons or water entered in the filter. Replace the filter. ●...
SPECIFICATIONS Model KJ150F-C02 Adapter Power Supply Input 110-120V ~ 50/60Hz 0.6A Max Unit power supply 24V DC 1A CADR 140m Noise level Max:56 dB(A) min: < 25dB(A) Dimension in mm 215x215x335 Net weight 1.8 KG U 1 4...
Need help?
Do you have a question about the KJ150F-C02 and is the answer not in the manual?
Questions and answers