Subscribe to Our Youtube Channel
Related Manuals for taskit Portux920T EU
Summary of Contents for taskit Portux920T EU
- Page 1 Quick Start Guide taskit GmbH Quick Start Guide Portux920T EU / SW Portux Mini-PC Portux Panel-PC Panel-Card MoLUX Stamp Page 1 of 15 Version 1.14...
- Page 2 All rights reserved. This document and the products referred to herein are copyrighted works of taskit GmbH. Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form, without the express written permission of taskit GmbH.
-
Page 3: Table Of Contents
Quick Start Guide taskit GmbH Table of contents 1.Introduction...................4 2.Package contents.................5 2.1.Portux920T EU..................5 2.2.Portux920T SW..................5 2.3.Portux Mini-PC..................5 2.4.Portux Panel-PC...................6 2.5.Panel-Card.....................6 2.6.MoLUX....................7 2.7.Stamp....................7 3.Setting up the Hardware..............9 3.1.Portux920T EU..................9 3.2.Portux Mini-PC..................9 3.3.Portux Panel-PC without aluminium-case.........9 3.4.Portux Panel-PC with aluminium-case..........10 3.5.Panel-Card...................10 4.Creating a terminal connection to a PC........11 4.1.Terminal access under Linux............11... -
Page 4: Introduction
Quick Start Guide taskit GmbH 1. Introduction Your product is delivered with an customized Linux and the bootloader U-Boot. To start running you have to read the QuickStartGuide. If you want to configure the Linux kernel, install permanent drivers or software or modify the bootloader you have to work the LinuxGuide over. -
Page 5: Package Contents
Standard If you have ordered the Portux920T EU, following parts are delivered: Portux920T EU ● Starterkit If you have ordered the Portux920T EU starterkit, following parts are delivered: Portux920T EU ● PXB-USB ● Firmware CD (Documentation, Linux, U-Boot and GNU-Tools) ●... -
Page 6: Portux Panel-Pc
GmbH PXB-USB ○ Starterkit If you have ordered the Portux Mini-PC starterkit, following parts are delivered: Robust aluminium housing including: ● Portux920T EU ○ PXB-USB ○ Firmware CD (Documentation, Linux, U-Boot and GNU-Tools) ● Ethernet cable (patch and crossover) ●... -
Page 7: Molux
Quick Start Guide taskit GmbH Starterkit If you have ordered the Panel-Card starterkit, following parts are delivered: Panel-Card with TFT-Display ● Starterkit baseboard ● Firmware CD (Documentation, Linux, U-Boot and GNU-Tools) ● Ethernet cable (patch and crossover) ● Null modem cable ●... - Page 8 Quick Start Guide taskit GmbH Stampadaptor (for starterkit baseboard) ● Starterkit baseboard ● Firmware CD (Documentation, Linux, U-Boot and GNU-Tools) ● Ethernet cable (patch and crossover) ● Null modem cable ● Power pack ● DBGU adapter ● Page 8 of 15...
-
Page 9: Setting Up The Hardware
Quick Start Guide taskit GmbH 3. Setting up the Hardware 3.1. Portux920T EU First connect a 2-wire power connecting cable to X7 (V ). Pay attention to connect the red wire with V + and the black wire with V -. -
Page 10: Portux Panel-Pc With Aluminium-Case
Quick Start Guide taskit GmbH mini force clamp must be pressed downward and the cable end be completely introduced. Examine the firm tightness of the cables. Follow the steps described below (“Portux Panel-PC with aluminium-case”) to connect the Portux Panel-PC to a PC. -
Page 11: Creating A Terminal Connection To A Pc
Quick Start Guide taskit GmbH 4. Creating a terminal connection to a PC To use U-Boot and Linux effectively as a development environment, you need terminal access via the serial port. Later, the system can be configured to start automatically – user interaction is no longer required. -
Page 12: Terminal Access Under Windows
Quick Start Guide taskit GmbH Then you can re-start Kermit: kermit -c Upon starting U-Boot on the target system, a console is available on the serial port. 4.2. Terminal access under Windows Windows operating systems generally offer HyperTerminal as a free terminal emulator, already included in the standard installation. -
Page 13: The Boot Process / Login
$ xxxxx login: In standard installations, only the superuser “root” has been created. Log in as “root” with the password “taskit”. The password of earlier Linux distributions from taskit (before 2007-11-01) is “portux”. Page 13 of 15... -
Page 14: Copying Files Or Applications
Quick Start Guide taskit GmbH 6. Copying files or applications With the ethernet interface it is possible to start applications or to copy files from a PC very fast (copying big files over the serial interface using kermit will take a long period of time). -
Page 15: Mounting The Directory
Quick Start Guide taskit GmbH 6.3. Mounting the directory You can mount the remote directory to /mnt on the target system by entering the following line into the terminal: mount -t nfs -o nolock 192.168.4.1:/develop /mnt Where 192.168.4.1 is the IP-address if the remote PC and /develop the shared folder.
Need help?
Do you have a question about the Portux920T EU and is the answer not in the manual?
Questions and answers