Check Installation - Titan USB-COMi Installation Manual

Windows 7/ Vista / 2003 / XP / 2000 Driver Installation
You need to have administrator privileges to install any new drivers under Windows
7/ Vista /2003/XP /2000. To install the driver or update the configuration please log
onto Windows as "Administrator" or ask your system administrator to install the
USB-COM driver.
You need to install driver first, prior to hardware installation. Do not connect the
USB-to-Serial Adapter to the USB port of your computer, before you finish driver
installation.
Please proceed with the following steps to install the driver:
1. Insert the "USB COM Series Driver and Utility" CD into your CD-ROM.
2. The "USB COM Series Driver and Utility CD" dialog box appears.
3. Under "Driver Installation", double click "Windows 7, Vista, 2003, XP, 2000
driver" to install the device driver.
4. The USB COM install program will auto-detect the OS type and install the
driver automatically. (Note: in Windows 7 or Vista OS you will find another
dialog box, please click on "OK" to confirm the drivers install program).
5. After the message "FTDI CDM Driver installation process completed"
appears, press "Enter" to complete the driver installation.
6. Plug in the USB to Serial Adapter to the USB port of your computer.
Windows will finish installing the driver files.

Check Installation

You can now verify the installation has been completed successfully by looking
under Device Manager of the System Properties screen. (Go there by Start-Setting-
Control Panel-System Properties-Hardware-Device Manager.
The device should have installed as a "USB Serial Port (COMx)" attached to "USB
Serial Converter ".
USB-COMi & USB-COMi-SI USB to RS-422/485 Adapters User's Manual
6