Kenxen WSF01 User Manual

WSF01
AUTO-FEED PORTABLE Wi-Fi SCANNER
User Manual
1 List of accessory
USB cable, Scanner, Software CD, User Manual, 6 x AA batteries, Pouch.
2 Warnings for safety use
Please do the operation according to below safety rules in case of any hurt:
● Be away from fi re or hot device
● Be away from water
● Be away from dust or dirty
● Do not disassemble the scanner
● Do not knock the product
● Please use the required Micro SD card
● Be away from such environment with strong electromagnetic
interference
3 Product Information
This is a kind of Auto-Feed Portable Wi-Fi Scanner, it work as an automatic feeding scanner when use with docking station. Via
DIRECTSCAN Pro apps, it can scan & Wi-Fi transfer the image to mobile devices directly (iOS & Android).
With batteries & Micro SD card, it can work without PC. When work with PC, it is no need for Micro SD card & batteries. DIRECTSCAN
software included and it provides these functions of Picture Direct, OCR Direct, BCR Direct, Scan and OCR.
In this way, it can input these pictures into your needed software and do the OCR conveniently.
It can be previewing after you completed scanning. It is also very convenient to carry and you can use it to scan almost anything. It can be
connected to iPad & Android tablets to load scanned pictures directly.
4 Product Specifi cations:
Product Size(LxWxH) 285 mm x 50 mm x 43 mm
Weight 350g
Color type CIS (Contact image sensor)
Resolution 300DPI (default) , 600DPI , 1200DPI
Scanning speed A4 length: 1200DPI with color: ≤ 8s
600DPI with color: ≤ 5s
300DPI with color: ≤ 5s
Scan width 216mm
Scan length 300DPI: ≤ 1200mm
External memory card Micro SD card (TF Card) up to 32GB
Output fi le format JPEG / PDF
Display Panel 1.45" Color LCD (480*320)
Focus range Contact, ±0.3mm
USB Port USB 2.0 high Speed
Power source 6 x AA batteries or USB
USB mass storage Windows XP / Win7 / Vista or above
Wi-Fi 802.11b/g/n
CD software System Operation System: Windows XP / Win7 / Vista or above
requirement CPU: Pentium III or above
RAM: At least 256MB
CD ROM: 4x speed CD ROM or above
5 Introduction on appearance
5.1 Front View
8
No. Name
1 Enter Preview the scanning image
2 Up / Resolution In menu mode, Upward function
In main interface, Resolution selection
3 Power/Scan Power on / Power Off / Menu
Power off mode, press this button for 2 second to turn on
Power on mode, press this button for 2 second to turn off
Power on mode, you can also press this button shortly to start or end scanning
4 SD Card Slot The place to insert Micro SD card
5 Down / File format In menu mode, Downward function
In main interface, File format selection
6 Menu Enter into menu, this button is to confi rm the function on the menu
7 USB Port When plug in USB cable and connect with PC, it can scan and input directly.
It also can use USB cable to provide 5V power supply and it is no need to load batteries.
8 Adjustable Plate To fi x scanning document width
9 TFT Screen Show all the working status
5.2 Bottom View
No. Name
1 Battery Cover You can load 6xAA batteries after opening. Scanner cannot recharge these batteries itself and you
need to take out for recharging if applicable.
6. Introduction on Micro SD card capacity
Below is the store capacity for 2GB card based on A4 standard paper side:
2GB Micro JPG
SD Card
300Dpi 600Dpi
Color
1600 600
Mono
2000 800
Remark: the quantity may vary due to different fi le color, size or content and the above information just for reference.
7. Introduction on TFT Display
When you switch on the scanner powered
by batteries, you can use Micro SD mode to scan / Wi-Fi mode
● Main Menu, scan and save ● Micro SD mode, scan & save
into Micro SD into TF card
7.1 Introduction on TFT Display
Right is the image for the TFT display:
NO. Name
1 Time Show setting time( hour: minutes: seconds)
2 Scanning QTY Show the scanning QTY saved in the Micro SD card
3 Encryption Select
Encrypting
4 Micro SD Card Status To indicate Micro SD card status: 1. No signal means no Micro SD card insert.
2. Signal means Micro SD insert. 3. Signal
5 Resolution Resolution level
6 Format Select Scanned fi le format
7 Color format scanning image is mono or color
8 Battery Status To indicate the battery status:
Full power.
9 Status Display Showing scanning or connecting the PC
7.2 How to set Menu
Load scanner with Micro SD card & batteries and press "
Press " " button to enter and you can set color, resolution, fi le format, encrypted / not encrypted, format, time and reset here. Press
" " or " " to choose menu, press "
Press " " button to exit menu or pause about 5 seconds to return to main interface.
7.2.1 Color setting
Press " " button to start and press " " to enter. Choose "
" " show color mode, the scanned image will be colorized one; "
press " " or " " to choose.
Press " " button to exit the submenu.
7.2.2 Resolution setting
Choose " " menu, press " " button and enter the resolution option: 300dpi, 600dpi and 1200dpi can be chosen, press
" " or " " to select.
Press " " button to exit the submenu.
During standby status, you can press " " to select resolution directly
7.2.3 File format setting
Choose " " menu, press " " button and enter fi le format option:
" " to select.
Press " " button to exit the submenu.
During standby status, you can press " " to select fi le format directly
7.2.4 File encryption setting
Choose " " menu, press " " button to enter fi le encryption option: "
encrypted, press " " or " " to select.
Press " " button to exit the submenu.
Remark: 1. File locking or unlocking can only work after Micro SD card formatting;
● Please do not use an incorrect power supply
● Please do not mix the using of batteries
● Please do not break the USB cable
● Please do not painting
● Disposals of abnormal case
● Safety Storage
● Please do not insert or take out the Micro SD card when the scanner
is working, or it may cause some defects on Micro SD card
1200DPI with mono: ≤ 5s
600DPI with mono: ≤ 5s
300DPI with mono: ≤ 5s
600DPI: ≤ 1200mm 1200DPI: ≤1200mm
Mac 10.4 or above
9
Function / Description
1
Function / Description
PDF
1200Dpi 300Dpi 600Dpi
120 1600 600
120 2000 800
When you switch on the scanner powered by USB cable,
you can choose PC / Micro SD mode to scan / Wi-Fi mode
● Wi-Fi mode, working with
DIRECTSCAN Pro apps
1 2
3
9
4
8 7 6 5
Description
Not Encrypting
means Micro SD card is full.
Half power. Little power. Almost use up.
" for 2s to start.
" to enter the submenu option and press again to confi rm after selecting.
" menu, press " " and enter color option:
" show mono mode, the scanned image will be black & white,
or format can be chosen, Press "
" show scanned fi le encrypted, "
2. The fi le can be read only if you put the Micro SD card into scanner and connect to computer.
7.2.5 Formatting setting
Note: after formatting, all the data in the Micro SD card will be lost, please make sure before formatting
Choose "
Micro SD card.
7.2.6 Time setting
Choose "
When YEAR/MONTH/DAY/HOUR/MINUTE shows on the right upper part of the TFT display, you can set the YEAR/MONTH/DAY/HOUR/
MINUTE, press "
7.2.7 RESET setting
Under Wi-Fi mode, press "
card.
7.2.8 Previewing and deleting picture
During the standby status, you can press "
images.
If you need to delete any document, you can press "
not deleting, "
8 Introduction on connecting with Tablets
8.1 Connect to iPad to read SD card
1. Switch on the scanner.
2. Connect the scanner to the iPad by USB cable & *iPad connection kit.
3.The saved pictures in the SD card will be displayed automatically.
8.2 Connect to Android Tablets to read SD card
1. Switch on the scanner.
2. Connect the scanner to Tablet via USB cable.
3. DCIM folder will show on the screen, double click to enter the folder for loading pictures.
9. Operations for DIRECTSCAN APP
9.1 Download APP
Download "
9.2 How to connect scanner Wi-Fi
1.Press "
screen will be fl ashing and Wi-Fi sign "
2.Switch on Wi-Fi setting on your mobile device and search scanner Wi-Fi account, as "(DIRECTSCAN – XXXXXXX), then type password to
connect (Default password: 12345678);
9.3 Wi-Fi Direct
Click "
saved in Micro SD card, press "
can transfer to mobile devices directly. After scanning, you can save or do own editing.
9.4 Wi-Fi Repeat
press "
device Wi-Fi setting interface and connect the selected A/P Router Wi-Fi. Click "
to connect. Now, both scanner & mobile device connect to A/P router Wi-Fi and you can download the scanning image via Wi-Fi & share
saving images to others synchronically.
Back
New Password
Confirm Password
PEPEATER INTERFACE
9.5 Download & save pictures
1. Use DIRECTSCAN APP.
2. Open DIRECTSCAN APP and click
3. Select you needed pictures and touch
4. the downloaded images will be listed
editing directly. Pressing
the selected images, such as delete, remove etc. Click
select image and the selected image will be showing
Pressing
5. Click
6. Select your target folder and press
9.6 Editing picture
1. Select the pictures for editing.
1200Dpi
120
120
2. Save editing image After editing completed, press
image.
9.7 Modify remove folder
1. Click
for modifi cation or removing.
9.8 Wireless Security Setting
1. Switch Mode Button on the scanner to setting mode(Left).
2. Press
as below image.
Then you can set SSID & Password here.
10 Computer modify SSID & Password
10.1 Turn on scanner and switch the button to Wireless Lan mode
1. Turn on scanner and switch the button to Wireless Lan mode;
open "Wireless Network Connection" at your PC and then press
"Refresh network list".
3. Open the explorer to type 10.10.1.1 and switch the button to Wireless Lan setting mode after connecting. Press the Settings menu on the
left top of page to enter and submit the setting after modify the SSID & password. The newly SSID & password will take effect when you
resume the scanner.
Remark: Password should be 8 numbers.
" or
11 Introduction on connecting with PC
" show scanned fi le not
11.1 Scanning to Micro SD card
Insert Micro SD card and plug in USB cable (no need for batteries).
Press "
" menu, press " " button to enter formatting option: "
" menu, press " " button to enter time setting.
" or " " to adjust and press " " button to confi rm and enter the next time setting.
" button into " " select: "
" button to preview the scanned image and press "
" button to enter and there will appear "
" indicate deleting. Press " " button to confi rm.
" DIRECTSCAN app from App Store (iOS) or Play Store (Android) and setup.
" button and switch on scanner. Then press " /
" will turn into blue in 30 seconds. Now, Wi-Fi mode starts;
" DIRECTSCAN app to start, green Wi-Fi sign " " means Wi-Fi connected, press "
" button to enter Wi-Fi Direct operation, press "
More...
NETWORK
DIRECTSCAN-xxxxxxxx
ONE-123
Connecting...
DIRECTSCAN Apps
TWO-234
THREE-345
" button to enter Wi-Fi setting " " interface and choose a A/P Router Wi-Fi, input password and connect. Then go to mobile
Back
ONE-123
DIRECTSCAN-xxxxxxxx
SELECTING WI-FI...
Required
Required
TWO-234
THREE-345
OK
HJKDJAK-001
DAEFVZC-GEST
ONE-123
App interface App interface
to connect.
to download.
DIRECTSCAN
,select the image for
,you can make relevant editing on
to
. Then
button and save image to your target location.
to create new folder and name.
button to save.
to save
and to select the picture & folder and click
button and it will show the interface of Wireless Security Setting
" button about 2 seconds, power on, then blinking in the lower part of the TFT, press
" indicate not formatting, " " indicate formatting the
" stands for not formatting, " " stands for formatting Micro SD
" or " " to view whole
" & " " option,: "
" button to select Wi-Fi mode, red Wi-Fi sign "
" button can view all the documents
" button to start scanning and the scanned image
Connection Status
Back Edit
Save
DIRECTSCAN-xxxxxxxx
Synchronize
Scan
" button the scanner Wi-Fi ID will show on the interface
Connection Status Connection Status
DIRECTSCAN-xxxxxxxx
X
More...
NETWORK
DIRECTSCAN-xxxxxxxx
DIRECTSCAN-xxxxxxxx
ONE-123
Connecting...
TWO-234
THREE-345
Mobile device interface App interface
2. After refreshing, Wireless Lan "magic scan-XXXXXXXX" will DIRECTSCAN
turn up and the last 8 numbers are the same as the last 8
number of MAC Address on your scanner. Double click the
12345678
Wireless Lan and press the default password "
to connect.
or quickly to shift to
" indicate
" on the
"
it