108
9
With the <Tab> key, scroll to Done, and press <Enter>.
Create RAID 1 from a source drive
1
Install a new HDD and initalize it.
Warning! Do NOT initailize the source drive!
2
From the Main Menu, select Create Array, and press <Enter>.
3
Press the <Ins> key to add to the new drive(s) to the Selected
Drives field.
4
Press the <Enter> key to confirm your selection.
5
In the Array Type field, move the cursor to RAID 1(Mirror) and
press the <Enter> key.
6
Use the <Tab> key to scroll to the Array Label field and enter text
to identify the array. Press <Enter> to confirm the array's label.
7
Using the <Tab> key, scoll to the Create RAID via field and select.
Build. Press <Enter> to continue.
8
With the <Tab> key, scroll to Done, and press <Enter>.
Appendix C: SATA RAID configuration utility