Silex technology LAN 3100 Operating Manual

Silex technology LAN 3100 Operating Manual

Gigabit-ethernet to usb converter

Advertisement

Quick Links

S99.0.23.6C-01
As of version 1.0
Please carefully read these instructions
before use!
Please consider the safety instructions!
Please keep for future reference!
GREISINGER
D - 93128 Regenstauf, Hans-Sachs-Straße 26
+49 (0) 9402 / 9383-0
Gigabit-Ethernet to USB converter
LAN 3100
electronic GmbH
+49 (0) 9402 / 9383-33
Operating manual
WEEE-Reg.-Nr. DE 93889386
info@greisinger.de

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LAN 3100 and is the answer not in the manual?

Questions and answers

Summary of Contents for Silex technology LAN 3100

  • Page 1 S99.0.23.6C-01 Operating manual Gigabit-Ethernet to USB converter LAN 3100 As of version 1.0  Please carefully read these instructions before use!  Please consider the safety instructions!  Please keep for future reference! WEEE-Reg.-Nr. DE 93889386 GREISINGER electronic GmbH D - 93128 Regenstauf, Hans-Sachs-Straße 26 ...
  • Page 2: Intended Use

    2 Safety 2.1 Intended Use The LAN 3100 converts USB device connections to a PC via Ethernet. The safety requirements (see below) have to be observed. The device must be used only according to its intended purpose and under suitable conditions.
  • Page 3: Safety Guidelines

    S99.0.23.6C-01 Operating manual LAN 3100 Page 3 of 4 _____________________________________________________ _____________________________________________________________________________ 2.3 Safety guidelines This device has been designed and tested in accordance with the safety regulations for electronic devices. However, its trouble-free operation and reliability cannot be guaranteed unless the standard safety measures and special safety advises given in this manual will be adhered to when using the device.
  • Page 4: Device Configuration

    Documentation Device Server Setup CD Operating manual Driver CD (with USB to serial drivers and LAN 3100 drivers) 5 Driver installation and configuration 5.1 Device configuration The IP address will be assigned through DHCP. After the valid DHCP process the device is available in the LAN.

Table of Contents