Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for RecorderGear DC200i
Summary of Contents for RecorderGear DC200i
- Page 1 USER MANUAL...
- Page 3 In order to comply with 18 U.S. Code § 2512 federal law, the audio recording function has been removed from the DC200i. You can rest assured that this device is 100% legal to use in the USA. Please be familiar with your country and state surveillance laws before using this product.
-
Page 4: Table Of Contents
Table of Contents 1 Insert Micro SD Card 2 Power On/Off 3 Motion Detection Recording Mode 4 Continuous Video Recording Mode 5 Photo Taking Mode 6 Playback Files 7 Set Time/Date 8 Resolution Settings 9 Troubleshooting 10 Specs Sheet... -
Page 5: Insert Micro Sd Card
Insert Micro SD Card The DC200i supports up to a 128GB micro SD card. Do not power on the DC200i before inserting a micro SD card. 1. Remove SD card cover on the back of the DC200i. 2. Insert a micro SD card into the memory card. -
Page 6: Power On/Off
Power On/Off To Power On the DC200i: 1. Make sure a micro SD card is inserted. 2. Plug in DC200i to a wall outlet using the micro USB cord provided. 2. Press the “A” button. 3. The DC200i will power on and enter into Motion Detection mode indicated by one beep. -
Page 7: Motion Detection Recording Mode
Begin Motion Detection Video Recording: 1. Insert a Micro SD card. 2. Plug in DC200i. 3. Power on the DC200i by pressing the “A” button. 4. The DC200i will beep once indicating it has powered on and automatically go into Motion Detection Mode. -
Page 8: Continuous Video Recording Mode
Start Continuous Video Recording: 1. Insert a micro SD card. 2. Plug in the DC200i via the micro USB cord. 3. Power on the DC200i by pressing the “A” button. 4. The DC200i will beep once indicating it has powered on and in motion detection mode. -
Page 9: Photo Taking Mode
10 minute long intervals. Photo Taking Mode 1. Insert a micro SD card. 2. Plug in DC200i using micro USB cord provided. 3. Power on the DC200i by pressing the “A” button. 4. The DC200i will beep once indicating it has powered on and in motion detection mode. -
Page 10: Playback Files
SD card. Use the steps below for any MAC or Windows computer. 1. Power off the DC200i. 2. Take out the micro SD card from the DC200i and insert it into a micro SD Card reader. 3. Insert the micro SD card reader into the card reader slot or USB port on your computer. -
Page 11: Set Time/Date
2015-06-24 04:56:00 Y1. 3. Name the file “time.txt” and save it in the root folder of the micro SD card. 4. Insert the micro SD card into the DC200i and make a recording, the changes will take effect. NOTE: If you would like to turn off the time and date stamp put “N1”... -
Page 12: Resolution Settings
• Y3 is 720P 60FPS 4. Name the file “time.txt” and save it in the root folder of the micro SD card. 5. Insert the micro SD card in your DC200i and make a recording, the changes will take effect. NOTE: If you don’t want the time and date stamp on... -
Page 13: Troubleshooting
If your DC200i becomes frozen or unresponsive use the provided reset pin or a paperclip, insert it into the DC200i’s reset hole for 2-3 seconds to reset the DC200i. Resetting the DC200i will not erase any saved files from the micro SD card. - Page 14 MID: CDC-1080DVR 1 Year Warranty All RecorderGear™ brand products are backed by our 1 Year Warranty. For full details visit www.recordergear.com www.recordergear.com RecorderGear™ and respective logos are trademarks of Teton Webstores LLC ©2017 ALL RIGHTS RESERVED...
Need help?
Do you have a question about the DC200i and is the answer not in the manual?
Questions and answers