Fast Forward EnergyCam 1011 Quick Start Manual

FAST EnergyCam Data Logger
Quick Start Guide
1 - How it works
EnergyCam Data Logger reads mechanical meters such as electricity, gas and water meters and logs the
readings into a CSV file, which can later be transferred to a PC.
This guide gives you all the information you need to set up and run the device.
2 - What's in the box
1) EnergyCam Data Logger
2) 3M VHB surface cleaning kit
3) 3M adhesive pads
4) Quick Start Guide (this document)
Various battery types (Art. Nr. 1072, 1073) available!
3 - Installation
On the back of this page you'll find instructions on how to configure and install your
EnergyCam Data Logger.
For instructions on how to transfer the logged data to a PC, see EnergyCam manual, chapter 3f.
4 - Safety Information
WARNING: If the battery is replaced improperly, there is danger of explosion.
As internal battery, a CR 2450 lithium 3V button cell must be used.
Batteries, electrical and electronic devices may not be disposed of with household waste.
These devices must be returned to designated collection facilities appointed by the government or by the local authorities.
The CE mark is a free trade mark. It does not guarantee any product features.
5 - Technical support
If you have any problems or questions, please contact us directly:
You can reach us from Monday to Friday between 0900 and 1700 CET
Tel: +49 (0)89-540-40-100
www.fastforward.ag/eng/support
FAST FORWARD AG Ruedesheimer Strasse 11, D-80686 Munich
(Art.Nr.1011)
Page 1 / 2