Advertisement
Quick Links
Sand Filter
Systems
Item #s 156593, 156594 & 156595
INSTALLATION, OPERATION & PARTS
▲WARNING
This equipment must be installed and serviced by a qualified technician in accordance with all applicable codes
and ordinances. Improper installation can create hazards which could result in property damage, serious injury
or death. Improper installation will void the warranty. The NOTICE label indicates special instructions that are
important but not related to hazards.
Notice to Installer
This manual contains important information about the installation, operation and safe use of this product. Once
installation is complete, this manual must be given to the owner / operator of this equipment.
5718 52nd Street Kenosha WI 53144 | Orders and Customer Care: 1-866-616-1270 | Fax: 1-866-616-1271 | HarrisPoolProducts.com
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Harris 156593
- Page 1 Sand Filter Systems Item #s 156593, 156594 & 156595 INSTALLATION, OPERATION & PARTS ▲WARNING This equipment must be installed and serviced by a qualified technician in accordance with all applicable codes and ordinances. Improper installation can create hazards which could result in property damage, serious injury or death.
- Page 2 CHAPTER 1 4. Ensure that the compliance label is facing the front to allow easy identification in the case of IMPORTANT SAFETY INSTRUCTIONS service difficulties. READ AND FOLLOW ALL INSTRUCTIONS CHAPTER 3 : INSTALLATION INSTRUCTIONS 1. The Sand Filters are designed to work with water ▲WARNING This product should be installed and at a temperature from 32ºF and 113ºF.
-
Page 3: Chapter 4 : Initial Startup Of Filter
9. To connect the pump to the base, use the screws 9. Test the filter and check for leaks around the from the pump hardware pack. Use the pump threads. If leaking occurs disconnect plumbing and manual to install the and operate the pump. repeat the steps 2 to 6 until the leak has stopped. -
Page 4: Chapter 5 : Multiport Valve Operation
CHAPTER 5 CHAPTER 6 : MULTIPORT VALVE OPERATION : BACKWASHING The function of backwashing is to separate the deposited particles from filter media grains and flush Backwash them from the filter bed. Backwashing is achieved by reversing the flow of water through the filter bed at a fairly high flow rate. - Page 5 BACKWASHING. RATE PRESSURE AREA REQUIRED 2. Maintain a correct chemical balance for your pool or spa’s water. The chemical balance of the water 156593 1.25 is a relationship between its pH, Total Alkalinity, Calcium Hardness and water temperature. The 156594 2.00...
- Page 6 Above Ground and Inground Sand Filter Systems Item #’s 156593, 156594 & 156595 PART DESCRIPTION NUMBER REQ’D 647202701080 Sand Filter Support for 156593, 156594 & 156595 647304073 Drain Plug 647304017 Lateral for 156593 & 156594 647306016 Lateral for 156595 647304079...
Need help?
Do you have a question about the 156593 and is the answer not in the manual?
Questions and answers