Drain Pan; Terminal Block; Micro Swich Assembly; Thermostat - LG DHA1260HL Service Manual

3.2.5 DRAIN PAN

1. Remove the shroud. (Refer to section 3.2.4)
2. Remove 2 screws which fasten drain pan.
3. Remove drain pan by unhooking both sides slots.
(See Figure 13)
4. Replace the components by referring to the
removal procedure above.

3.2.6 TERMINAL BLOCK

1. Remove the cabinet. (Refer to section 3.1.3)
2. Disconnect all the leads terminal block.
3. Unfasten the screw which fastens the terminal
block. (See Figure 14)
4. Replace the components by referring to the
removal procedure above.
3.2.7 MICRO SWITCH ASSEMBLY
1. Remove the cabinet. (Refer to section 3.1.3)
2. Disconnect all the leads of micro switch assembly.
3. Turn the nut left and take off the micro switch
assembly. (See Figure 14)
4. Replace the components by referring to the
removal procedure above.

3.2.8 THERMOSTAT

1. Remove the cabinet. (Refer to section 3.1.3)
2. Disconnect all leads of thermostat.
3. Remove the THERMOSTAT. (See Figure 15)
4. Replace the components by referring to the
removal procedure above.
Push
—11—
Push
Figure 13
Figure 14
Thermostat
Figure 15