Omnitech OMT-601 Manual

GENERAL DESCRIPTION

It is designed to backup or duplicate the card ID from the EM4100 or compatible card format.

FEATURES

•
Support 125Khz EM4100 or compatible card format only
•
Standalone 2 buttons Simple operation
•
don't need connect with computer for operation
•
Built-in LED and buzzer indicator
•
Built-in transceiver antenna
•
Battery power : 3V ( 2 x AAA battery )
•
No external power is needed
•
Portable design / size : (115 x 70 x 30) mm
Operation Manual – duplicate a EM4100 Card ID
[1] insert 2 x AAA battery here
[2] power switch on (Power red LED will flash per second)
(Low battery - if found fast "power LED" flash and "beep " sound keep
continuously, need change a new battery)
[3] Place a EM4100 or compatible card on the reader's detection area .
[4] press "Read" button ,
If the card format is correct , "Read" LED will be flash and "beep" 3 times
(If the card is not supported , No response from the reader)
[5] take away the EM4100 card and place a EM4100 RW Card or keyfob on the reader's detection area.
Press "Write" button about ~1-2 second
(If R/W card type is incorrect, No response from the reader)
RFID Card Place Here
READ Button
OMT-601 125KHz-ID Reader
Handheld 125K EM4100 ID copier
If write success , will hear "beep" 3 times

LED indicator

Power read write
Power Switch
Write Button