Advertisement
Advertisement
Table of Contents
Summary of Contents for Raycon SCOOT-E-BIKE FLEX
- Page 1 RAYCON SCOOT-E-BIKE FLEX User Manual REB9600...
-
Page 2: Table Of Contents
TABLE OF CONTENTS I. Introduction II. What's Inside III. Unit at a Glance IV. Usage A. Installing the Bike B. Unfolding the E-bike C. Powering the bike and riding D. Activating the Front Light E. Other Functions V. FAQ and Additional Resources VI. -
Page 3: Introduction
I. INTRODUCTION Welcome to your new Raycon Smart Electric Bike REB9600! At Raycon, we are committed to design and provide products that help you conquer your adventures every day! The Raycon Smart Electric Bike 9600 is our forward-thinking electric bike that has its trademark feature to automatically unfold and fold at the press of a button. - Page 4 The bike comes folded in a box and you have to unfold it first to start using it. 1. First, place the front fender of the bike in 2. Insert the front wheel into the center shaft position and secure it in place by putting the at the specified position and fix it.
- Page 5 5. To install the handlebars, place the plastic 6. Now the E-bike is assembled and ready to washer division on the designated position as be used. shown, and tighten the screws with a 4.0 allen key. This will fix the handlebars in position. B.
-
Page 6: Unfolding The E-Bike
Power button Bell button Unlock button Lock button 3. Shift down on the right hand handlebar to 4. If you’d like to lock the bike, simply press accelerate. Shifting more down will further the lock key. accelerate the bike and letting go will decelerate the bike. -
Page 7: Other Functions
Note: The bike can only unfold and fold through the buttons underneath the seat. It cannot be folded manually for security purposes. Folding button 3. To fold the bike again, hold the key directly below the seat for 3 seconds and the bike will begin folding automatically. -
Page 8: Faq And Additional Resources
Unlock button the unlock button. Lock button - Vehicle search function: Your Raycon Scoot-E-Bike Flex comes with a vehicle search function. When your E-bike is turned off, simply press the bell button and it will start sounding an alarm so you can locate your bike. - Page 9 viii. When the battery’s green light is on, please cut off power in time. ix. The charger is not allowed be connected to the AC power for a long time if don’t charging. x. When begin to charge, firstly plug battery, then supply AC power. When stop charging, firstly cut off AC power, then unplug battery.
-
Page 10: Support
1. Store your E-bike in a place where there is no direct sunlight and no rain when finish your riding. 2. Regularly check the E-bike screws and tighten the places where need be tighten. 3. If E-bike surface have stains, please use soft cloth dips in water to wipe. Do not use alcohol, gasoline or other corrosive and volatile chemical solvent to wash, otherwise it will seriously damage the surface of the E-bike body or internal structure of it.