Related Manuals for Euroheat IN1203
Summary of Contents for Euroheat IN1203
-
Page 1: Remote Control
This Manual Must Always be Available to the Stove Operator Euroheat Natural Energy Company Operating & Installation Instructions for the Thermostatic Remote Control Wood and Gas Stoves IN1203 Edition B January 2011... -
Page 2: Installation
Important Dip switch settings Under no circumstances should the remote control be used if the dip switch settings have not been correctly set. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. January 2011 Operating Instructions Part number IN1203 Ed. B... -
Page 3: Contents Of Kit
Easy access front battery door Preprogrammed for quick installation Low battery indication Child proof lockout Thermal shutdown and out of range shutdown on transmitter Quick disconnect wiring assembly Reset button © EUROHEAT DISTRIBUTORS (H.B.S) LTD. January 2011 Operating Instructions Part number IN1203 Ed. B... - Page 4 When removing the batteries the positive end should be lifted out first. Positive end inserted last when fitting Positive end removed first when replacing See page 8 and 13 for details about setting the dip switches. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. January 2011 Operating Instructions Part number IN1203 Ed. B...
- Page 5 The batteries supplied with the kit are for test purposes only and will only have a limited life, new batteries should be fitted as soon as is practical. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. January 2011 Operating Instructions Part number IN1203 Ed. B...
- Page 6 If it becomes neccessary to remove the motor plug the latch should be squeezed to release the locking mechanism. Clip on the manual override switch cover plate. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. January 2011 Operating Instructions Part number IN1203 Ed. B...
-
Page 7: Testing The Receiver's Motor Operation
Low battery power in the transmitter or receiver can affect the operation of the remote control in any mode. In some cases the motor may run continuously with low battery conditions. Replace batteries to stop this occurring. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. January 2011 Operating Instructions Part number IN1203 Ed. B... -
Page 8: Dip Switch Settings
IMPORTANT The unit must never be operated with a gas stove unless the dip switch number 2 set to the off position © EUROHEAT DISTRIBUTORS (H.B.S) LTD. January 2011 Operating Instructions Part number IN1203 Ed. B... - Page 9 34 93.2 41.0 59.0 77.0 35 95.0 42.8 60.8 78.8 36 96.8 44.6 62.6 80.6 37 98.6 46.4 64.4 82.4 38 100.4 48.2 66.2 84.2 39 102.2 © EUROHEAT DISTRIBUTORS (H.B.S) LTD. January 2011 Operating Instructions Part number IN1203 Ed. B...
-
Page 10: Temperature Display
Low Battery The low battery symbol will display when the batteries are almost exhausted and need replacing. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. January 2011 Operating Instructions Part number IN1203 Ed. B... -
Page 11: Setting The Auto Temperature
By pressing the AUTO button again the set temperature is removed from the display and the unit will respond only to the commands of the buttons, to raise, and to lower, the heat output of the stove. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. January 2011 Operating Instructions Part number IN1203 Ed. B... -
Page 12: Child Lock
If the ambient temperature reaches 99 degrees fahrenheit the handset will automatically turn the stove’s output to minimum, even if the handset is in manual mode. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. January 2011 Operating Instructions Part number IN1203 Ed. B... - Page 13 IMPORTANT The unit must never be operated with a gas stove unless the dip switch number 2 set to the off position © EUROHEAT DISTRIBUTORS (H.B.S) LTD. January 2011 Operating Instructions Part number IN1203 Ed. B...
-
Page 14: Optional Transformer
The receiver may also be powered by using a transformer which may be obtained from your Euroheat Dealer. Only the transformer supplied by Euroheat should be used with the remote control kit. The plug to the receiver fits in the socket next to the motor wiring plug. - Page 15 The motor can now be slipped into place. The magnet retains the motor. Connect the electrical lead to the receiver box and place the receiver box in its holder. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. January 2011 Operating Instructions Part number IN1203 Ed. B...
- Page 16 The motor is retained by the magnet. Connect the electrical lead to the receiver box and place the receiver box in its holder. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. January 2011 Operating Instructions Part number IN1203 Ed. B...
- Page 17 Ensure that the receiver will accept instructions from the handset. They must match each others coding and the instructions for this are in the operating instructions. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. January 2011 Operating Instructions Part number IN1203 Ed. B...
-
Page 18: Troubleshooting
No:1 dip switch on both the feature programmed into handset and the receiver box the handset. This turns the to the OFF position. See page stove down to its minimum setting. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. January 2011 Operating Instructions Part number IN1203 Ed. B... - Page 19 Increase the separation between the equipment and receiver. Consult the dealer or an experienced radio/TV technician for help. Euroheat and Nestor Martin have a policy of continual research and development and reserve the right to modify its appliances without prior notice.
- Page 20 10,000 pages of technical information, spare parts, product shots, news and 1001 other things, - you will not find a more comprehensive solution to your queries, whatever time of the day. www.euroheat.co.uk Court Farm Business Park, Bishops Frome, Worcestershire WR6 5AY Pre sales: 01885 491112...
Need help?
Do you have a question about the IN1203 and is the answer not in the manual?
Questions and answers