TabTimer VibraLITE 12 Instructions

SIMPLE WATCH INSTRUCTIONS VIBRALITE 12
FUNCTIONS OF THE WATCH

CALENDAR/TIME

ALARM (up to 12 per day)

CHRONO (STOPWATCH)

COUNTDOWN TIMER (TIMER 1 & TIMER 2)

OPTIONS (Vibration, Sound, Hourly Chime, Vibration/sound when buttons are pressed)
MODE – allows you to move around the different functions listed above
and is also used in programming mode to move around the options within each function
SET/RST – allows you to enter into programming mode and exit the programming mode
ST./STP – allows you to change the settings of the numbers/times when in programming mode
FACTORY RESET – NOTE: this resets the watch and all programming and settings are lost.
Holding all four buttons in for 2‐3 seconds turns the watch off. Release and hold again to turn the watch on.
TO SET THE TIME
1. When you are on the normal date and time screen
– to enter programming mode, press and hold 'SET/RST' until T-ZONE 1 flashes.
2. Press mode and the hour should flash
3. To change the hour press 'ST./STP' until you reach the correct hour.
(Ensure that the 'PM' indicator is showing if you need the hour to be PM, or not showing if you need AM.
The indicator is in the first red square on the left hand side, under the day.)
4. Press 'MODE' to move to the minutes
5. To change the minutes press 'ST./STP' until you reach the correct minutes
6. Press the 'MODE' to move to the seconds – if required, reset the seconds to '00' by pressing 'ST./STP'
7. Press 'MODE' to move to the date and press 'ST./STP' to change the date
8. Press 'MODE' to move to the month and press 'ST./STP' to change the month
9. Press 'MODE' to move to the year and press 'ST./STP' to change the year
10. Press 'MODE' to move to TIME format and press 'ST./STP' to alternate 12hr or 24hr
11. Press 'MODE' to move to the DATE format and press 'ST./STP' to alternate between MM:DD
(Month:Date – American format) or DD:MM (Date:Month)
12. Press 'MODE' and you will return to T-ZONE 1
13. If you are happy with the settings you just programmed
- press 'SET/RST' to exit programming mode.
TabTimer™ helps keep medications on time™ |
Pricing and specifications are correct at the time of publishing and may change without notice. Your health professional should be consulted prior to using any TabTimer
product to establish the suitability of a TabTimer product for use, administration or storage of any medications. In purchasing and continuing to use our products you have
agreed to and accept the Terms and Conditions shown on our website. Images are for illustration purposes only. Errors and omissions excluded.
TabTimer™, 'helps keep medications on time™' and the TabTimer™ logo are registered trademarks of TabTimer Pty Ltd © TabTimer Pty Ltd ABN: 99 137 415 948
www.TabTimer.com.au | 1300 TAB TIMER (1300 822 846)