JVA Cellular Gateway Quick Start Guide Introduction The PTE0320 JVA Cellular Gateway connects a group of JVA Z Series devices to the Cloud Router system. This quick-start guide tells you how to program the devices, and connect and configure the PTE0320 Cellular Gateway.
JVA Cellular Gateway Quick Start Guide Overview LED Indicators Blink when the unit is communicating with Z series devices Blinks when the unit can receive SMS Fully lit when connected to the Cloud Router server (can also receive SMS) ERROR...
Confirm the KPB is flashing, the ERROR light is not flashing, and the GSM light is fully lit. Clip on the case front. If the GSM light is on, your JVA Cellular Gateway is ready to use. Cloud Router Configuration Important –...
JVA Cellular Gateway Quick Start Guide SMS Function The PTE0320 Gateway can be controlled by SMS, and contact up to 10 numbers in case of an alarm, arm state change, or trouble. See http://jva-fence.com/sms for full instructions. NB: This applies to PCB version 4v03 and later, or units fitted with a “Cloud Router + SMS” sticker.
If there is more than one energiser, ensure one is configured as master (device ID 1) and the others have unique device IDs of 2 or more If the unit is still not working correctly, contact your nearest JVA distributor for technical support.
Need help?
Do you have a question about the PTE0320 and is the answer not in the manual?
Questions and answers