Advertisement
LongBoard SUP |
INFLATION:
Set Up
One-Way Air Valve
(Found only on DKS)
Tether the valve cap
onto the base of the
seat by stretching the
retainer ring with your
fingers to fit over the
groove in the base.
Stretch the ring if it is
too tight.
An A41 Large Bellows
Foot Pump is included
with the Deluxe
Package to inflate the
DKS seat.
Unravel the hose and
push down on the top &
bottom of the pump to
release the black clip.
Use the wide, flat
adapter to inflate the
seat.
The ribbed end goes
into the hose.
Insert the wide, flat
adapter into the
valve and inflate the
chambers.
Kayak Paddle
(OPTIONAL)
The asymmetrical spoon
blade design of this kayak
paddle will allow for a
smooth entry and an
even pull, maximizing the
power from each stroke.
They will also require less
gripping force.
Put the shaft together
first. Insert the shaft
piece with the button
into the piece with three
holes. Lock the button in
the middle hole.
Next, slide the drip
guards up the shaft to
about an inch above the
button hole. Insert the
blades into the shaft and
adjust until the button
locks the blade in place.
8
Advertisement
