Table of Contents
Advertisement
Quick Links
Global First
BA 100
Operating instruction
RG终检01
Scan WeChat
深圳市领马科技有限公司(监制)
My company reserves the right to change the design and specications for improving products without prior notice
Note: Product picture & dimensions are for reference only. Detailed information is in accordance with the nal product.
All the information are carefully checked , if any printing or translation errors occurred , my company will not bear the consequences
Advertisement
Table of Contents
Summary of Contents for ACCUR BA-100
- Page 1 Global First BA 100 Operating instruction RG终检01 Scan WeChat 深圳市领马科技有限公司(监制) My company reserves the right to change the design and specications for improving products without prior notice Note: Product picture & dimensions are for reference only. Detailed information is in accordance with the nal product. All the information are carefully checked , if any printing or translation errors occurred , my company will not bear the consequences...
- Page 2 BA-100 Function Brief SDI output standard testing pattern SDI monitor color calibration (work with CalMan 5 calibration software) Attention 1.Use the assorted power adaptor 2.Away from heat, keep ventilated 3.Connecting (plug) equipment, pay attention to esd protection 4.When equipment is on operation, note the waterproof, as well as the water splashed down Packing list：BA-100...
- Page 3 Hardware (interface/key) functions description Key functions description( ❷ ) Short press Press for 3s 576 50i---1080 50i Red LED turn on LUT OFF SMPTE cyclic switching Green LED Turn on LUT ON Interface functions description( ❶-❸-❹-❺-❻ ) ❶.HDMI output ❸.SDI input ❹.SDI output ❺.USB data controlling port ❻.DC 12V IN...
- Page 4 SDI/HDMI output standard testing pattern Step1.Plug the AC/DC adapter into the “ ”input in BA-100 Step2.Link BA-100 SDI OUT and SDI IN on the tested equipment by coaxial cable, switch the signal channel of the device to SDI mode, the tested pattern displayed.
- Page 5 Step2.connect the U disc with the BA-100 “ ” based on the OTG cable Step3.Keep pressing the SMPTE key , power the BA-100, once the SMPTE green light ash , release the SMPTE key , after nishing the upgrade , ashing status disappear , if the light ashing is always on , meaning MCU .FPGA upgrade failed...
- Page 6 2、Time delay:40ns 3、SDI signal Eye Diagram testing and signal quality characteristic parameter 576 50i 1080 50i Note : Eye diagram testing use the SDI cable from Canare L-3C2VS, length is 300mm. 1080 60p Interface SDI-OUT Video format SD-SDI HD-SDI 3G-SDI Amplitude（mv）...
-
Page 7: Hardware Connection
“ Support ” UI , then click “RgLutLoadTool” to download. Hardware Connection Step1.connect the power adaptor with the “ ” input end of the BA-100 Step2.connect the BA-100 with the computer via the USB cable LUT le loading Step1.Unzip the “RgLutLoadTool.rar” by clicking right button of the mouse Step2.Copy the LUT le(From_SLog2-SGumut_To_LC-709Type A... - Page 8 SDI channel or not； 3、When calibration , “Source”、“Displays” can not set well a:Please check USB cable connection well or not； b:Please check whether the BA-100 driving le(.dll) is installed well or not...
Need help?
Do you have a question about the BA-100 and is the answer not in the manual?
Questions and answers