Page 1
Directive RED 2014/53/EU. The Declaration of Conformity you find here: www.technaxx.de/ (in bar at the bottom “Konformitätserklärung”). Before using the device the first time, read the user manual carefully.
Content Preamble ...................... 3 Product overview ..................3 Front ......................3 Rear......................4 Important Safety Instructions ..............4 Description of device .................. 6 Package content ..................6 Features ..................... 6 Reset note ....................6 Precautions for use ..................7 Installation ....................7 How to prepare the appliance for operation ..........
Preamble These operating instructions will help you to use your Boombox BT-X38 in the correct and safe way, referred to in the following system or device. The target group of this manual: The operating instructions are intended for every person who operates, installs, cleans, or disposes this device.
Rear Rod antenna 20 Handle Frequency knob 21 Volume knob Radio / Bluetooth selector 22 Function selector Aux in jack 23 AC power connector Battery compartment Important Safety Instructions Caution: Risk of electric shock ! Do not open ! Do not remove front or back cover !
Page 5
Read the instructions. All uses guidelines must be read before start device. Keep the instructions for future use. Attention, use and security guidelines must be respected. The device must not be used near water or be put in contact with moisture. ...
Caution: Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This device should not be adjusted or repaired by anyone except qualified service personnel. Description of device Package content Make sure that the following accessories are included to your package: ...
Precautions for use Installation Unpack all parts and remove protective material. Do not connect the device to the mains before checking the main voltage and before all other connections have been made. Do not cover any vents and make sure that there is a space of several centimetres at the back of the device for ventilation.
Connecting an external sound source You can play the sound of an external device B (e.g. MP3 player) via the speakers of the device. First, connect an audio cable* (3.5mm jack, *not included) of the audio output of your external device to the AUX-IN connector (18). Second, turn the device on.
How to set the volume Turn the volume knob to higher or lower the volume. How to turn the device off Press and hold the Play/Pause/Power button (10) for about 5 seconds to turn off the device. The device will automatically switch off after about 10 minutes without music playback or operation.
Page 10
Note: When you make audio CDs, you are aware of the legal basis and do not violate the copyrights of third parties. Always keep the disc tray closed to prevent dust from accumulating on the laser optics. The device can play normal audio CDs (CD-DA).
Page 11
Note: If no CD is inserted, "No" appears in the display after a short time. Wait until the CD contents have been read completely to ensure that all the information you need has been read from the CD. How to remove a CD ...
Page 12
Skip mode (forwards / backwards During Play/Pause mode, if Skip up button (11) is pressed it will go to next track. The display shows the track no. and the play or pause mode continues. During Play/Pause mode, if Skip down button (3) is pressed it will go back to the beginning of the current.
Page 13
CD programming Up to 20 tacks can be programmed for disc play in any order. You can only program when a disc is in the closed CD compartment and the device is in stop mode. Before use, be sure to press the Stop button (2).
[5] Turn on the Bluetooth function of the BT device you want to link and enable the search or scan function to find the BT-X38. [6] Select "Technaxx BT-X38" from the BT device list when it appears on your BT device screen. If required, enter the pass code “0000” to pair (link) the device with your BT device.
Playback Wirelessly music playback via your Bluetooth device Select your favourite song, press the Play/Pause on your BT device to play or pause the song from your BT device. Press the skip forward/skip backward on your BT device to select the Next or Previous track.
Page 16
Playback Slide function selector (22) to select USB mode, Press and hold the Play/Pause/Power button (10) for about 5 seconds to turn on the device and the BT/USB indicator (13) will light up. The system will start reading and playback the storage media automatically after connecting, the BT/USB indicator (13) will flash during playback.
How to eliminate errors If the device does not work as intended, check the following tables. If you cannot solve the problem even after the described checks, please contact the manufacturer. Problems with the device Symptom Possible cause / remedy ...
Page 18
Problems with the CD player Symptom Possible cause / remedy The unit is not in CD mode. Incorrect CD inserted. The disc tray is not closed. Close the disc tray. CD is inserted incorrectly. Insert the CD with the labelled side facing up.
(use a clean drapery). Avoid using rough, coarse-grained materials or solvents/aggressive cleaner. Wipe the cleaned device accurately. Important Notice: Should battery fluid leak from a battery, wipe the battery case with a soft cloth dry. Distributor: Technaxx Deutschland GmbH & Co.KG, Kruppstr. 105, 60388 Frankfurt a.M., Germany...