Advertisement
Using the Tester
Standard 3 wire outlet
•
Always test on a known good outlet before use.
•
Plug the tester into the outlet, check the indicator lights
and refer to the following table for the current state of
the outlet.
•
If incorrect wiring is indicated, do not use outlet.
Consult electrician.
Indicator Fault
Open ground
Open neutral
Open hot
Hot/ground
Reverse
Hot/neutral
Reverse
Correct
Specifications
• AC Voltage Range: 110~125V
• Overload voltage: CAT II 125V
• Humidity: <80% relative humidity
• Operating Temperature: 32F To 104F(0°C to 40°C)
• Storage Temperature: 14F to 122F(-10°C to 50°C)
• Altitude: ~6500 ft. (2000 m); indoor use only
• Dimension: 3.15 x 1.65 x 1.26 in. (80x42x32mm)
• Weight: Approx. 1.6oz (45g)
Reason for Wiring Fault
Ground contact not connected
Neutral contact not connected
Hot contact not connected
Hot and ground contacts
reversed
Hot and neutral contacts
reversed
Receptacle is wired correctly
02
Contact Dawson
Dawson Tools, Inc.
Diamond Bar, CA 91765
Phone:(310) 728-6220
www.DawsonTools.com
00-05-4268
03
Advertisement
