Do you have a question about the Gecko MK III and is the answer not in the manual?
Questions and answers
Antony
May 11, 2025
Hi there - Can I use the MkIII to switch the patches of 2 different devices (in my case a Line 6 POD pro and a Marshall JFX-1) i.e. one midi lead to each midi out of each of the two effects units?
1 comments:
Mr. Anderson
May 20, 2025
Yes, the OneControl Gecko MK III can switch patches on both a Line 6 POD Pro and a Marshall JFX-1 using one MIDI lead for each device. It supports 16 MIDI devices on 16 channels and has two MIDI output jacks, allowing connection to two separate devices.
Page 1
USER’S MANUAL Features: - Support 16 midi devices on 16 channels. - 20 presets in total. - Tap tempo control on multi devices. - Two midi output jacks and two DC output jacks - Ultra low power consumption <1mA)with battery.
Page 2
1- Overview DOWN Switch This switch scroll down the presets or midi numbers UP Switch This switch scroll up the presets or midi numbers. (3) OK/TAP Switch Press this switch to recall a preset or send midi tap tempo messages. (4) Screen display The screen shows the preset and midi messages.
3- Operation Modes Three operation mode: Preset Pick mode, Preset immediate mode, Direct mode. Preset Pick mode - Setup code E1", the screen preset area displays the number of " the preset, DOWN " "/ "UP" switch selects the preset, the PC# in the preset will not be sent until the "OK"...
5- Midi Channel setup and Tap Tempo Control Each midi channel can be turned off separately, if a midi channel is turned off, its index number will not be present in a preset edit, it helps to speed up the preset edit. Each midi channel can also be assigned with a tap tempo control number, which will be sent when “OK”...
Need help?
Do you have a question about the Gecko MK III and is the answer not in the manual?
Questions and answers
Hi there - Can I use the MkIII to switch the patches of 2 different devices (in my case a Line 6 POD pro and a Marshall JFX-1) i.e. one midi lead to each midi out of each of the two effects units?
Yes, the OneControl Gecko MK III can switch patches on both a Line 6 POD Pro and a Marshall JFX-1 using one MIDI lead for each device. It supports 16 MIDI devices on 16 channels and has two MIDI output jacks, allowing connection to two separate devices.
This answer is automatically generated